Parts Manual Manual

3120800 1-57
S
E
C
T
I
O
N
1
F
R
A
M
E
SECTION 1 FRAME
FIGURE 1-16. AXLE LIFT CYLINDER INSTALLATIONS
FIG & ITEM # PART NUMBER DESCRIPTION QTY. REV.
AXLE LIFT CYLINDER INSTALLATION (STANDARD
PARTS - WHEN EQUIPPED)
Ref.
1 4843122 Bracket Weldment (Part of Frame Weldment after July
2000)
A/R
2 Axle Lift Cylinder Assembly Options (See Section 5 for
Breakdown):
A/R
1681991 Prior to S/N 34133
1683596 S/N 34133 to Present
3 3421584 Pin A/R
4 3450508 Pin, Cotter A/R
5 Bolt Options: A/R
0641809 Bolt 1/2”-13NC x 1 1/8” (Prior to S/N 34133)
0641844 Bolt 1/2”-13NC x 5 1/2” (S/N 34133 to Present)
6 Hardware Options: A/R
4761800 Lockwasher 1/2” (Prior to S/N 34133)
3311805 Locknut 1/2”-13NC (S/N 34133 to Present)
7 Plate, Base Options: A/R
3532839 Prior to S/N 34133
3340831 S/N 34133 to Present
8 4713400 Flatwasher 1 1/2” Narrow A/R
9 0100011 Loctite #242 (Not Shown) (Prior to S/N 34133) A/R
AXLE LIFT CYLINDER INSTALLATION
(VARIABLE PARTS)
Ref.
0250926 80HX with Fixed Front Axle/Single Axle Lift Cylinder Ref. 9
50 4640039 Valve, Control Options: 1
51 0641632 Bolt 3/8”-16NC x 4” 2
52 4761600 Lockwasher 3/8” 2
53 3311601 Nut 3/8”-16NC 2
54 3252453 Nameplate 1
55 2980089 Lever Options: A/R
4751400 Flatwasher 1/4” (Used with Lever when Required) 6
56 4565166 Tube, Spacer A/R
0256666 80HX 2WS with Fixed Front Axle/Dual Axle Lift
Cylinders
Ref. 3
0256131 80HX 4WS with Fixed Front Axle/Dual Axle Lift
Cylinders
Ref. 2
0256580 80HX 2WD with Oscillating Front Axle/Single Axle
Lift Cylinder
Ref. 4
0256619 80HX with Oscillating Front Axle/Dual Axle Lift
Cylinders (Euro Spec)
Ref. 3
0256579 80HX with Oscillating Front Axle/Dual Axle Lift
Cylinders (Australian Spec)
Ref. 4
57 Plate, Valve Mounting Options (Part of Frame After
July 2000 When Required):
A/R
3539843 80HX 2WS with Fixed Front Axle/Dual Axle Lift
Cylinders
1
Not Required 80HX 4WS with Fixed Front Axle/Dual Axle Lift
Cylinders
0