Parts Manual Instruction Manual

3121140 800S 860SJ 2-173
SECTION 2 TURNTABLE
FIGURE 2-35. 7500W SKYPOWER GENERATOR INSTALLATION - GM ENGINES
ITEM # PART NUMBER QTY. DESCRIPTION REV.
0275257 Ref 7500W SKYPOWER GENERATOR INSTALLATION E
Ref Note: SkyPower Generator is Standard On ANSI & CSA
Specs. Optional on All Other Specs.
Ref Note: See ELECTRICAL SECTION for Boom Cable Installa-
tion.
1 0100011 AR Compound, Locking
2 0100019 AR Compound, Locking
3 0480142 1 Belt, Generator
4 0641405 6 Bolt 1/4in-20NC x 5/8in
5 0641505 4 Bolt 5/16in-18NC x 5/8in
6 0641516 3 Bolt 5/16in-18NC x 2in
7 0641608 1 Bolt 3/8in-16NC x 1in (SN 0300087000 to SN 0300094705)
8 4 Bolt Options:
0641810 Bolt 1/2in-13NC x 1-1/4in (SN 0300087000 to SN 0300094705)
0641808 Bolt 1/2in-13NC x 1in (SN 0300094705 to SN 0300140000)
9 0700820 1 Bolt M8 x 60mm
10 0701016 1 Bolt M10 x 40mm
11 0860038 2 Box, Switch
12 0861538 1 Control Box Assembly
7024488 1 Card, Circuit - Generator Power
See Note 1 Fuse (Note: Not Available - Purchase Locally.)
7024489 1 Card, Circuit - Control
70000619 1 Harness, Control Box (Internal)
13 0861542 1 Junction Box Assembly (See Items 101-128 for Breakdown)
14 0902888 1 Bracket, Box Mounting
15 0962520 1 Bushing, Split Taper
16 0962521 2 Spacer, Tube
17 1671311 1 Cover, Generator Belt
18 2460048 1 Generator Assembly
7024484 1 Brushholder Assembly (Not Shown)
7024485 1 Breaker, Circuit 30Amp (Not Shown)
70001696 1 Boot, Breaker (was p/n 7024486 - Not Shown)
7027799 1 Block, Connection - 6 Position (Not Shown)
70002460 6 Nut, Brass (Attaches p/n 7027799 to Cover) (Not Shown)
7026597 1 Connector, W/Lead (Not Shown)
7026188 1 Connector, Clamp (Not Shown)
Use 70004169 1 Panel, End (Not Shown) (was p/n 70002255)
70002088 1 Stator (Not Shown)
70001974 1 Decal - Terminal Connections (Not Shown)
70000863 1 Fan (Not Shown)
70002297 4 Stud (Not Shown)
18A Use 70004171 1 Key (was p/n 7024561)
18B 70001966 1 Bearing, Shaft (Front)
18C 70001953 1 Endbell (Front)
18D 70001100 1 Shaft/Rotor/Windings/Fan/Rear Bearing Assembly
70001384 1 Bearing, Shaft (Rear)
18E Use 70004169 1 Endbell, Brush Block (was p/n 70001385)
18F 70001973 1 Decal - Warning Moving Parts