Parts Manual Instruction Manual

7-42 800S 860SJ 3121140
SECTION 7 ELECTRICAL
218 (cont’d) 20ft/6.1m Cable, Electrical - 12/4&18/8 Options:
1060896 Standard & Sky Welder
4923462 With Arctic Package
218A 4460465 22 Socket, Female 18 Gauge
218B 4460865 2 Connector - 19 Position
218C 4460509 8 Socket, Female 12 Gauge
218D 4460473 2 Clamp. Cable
218E 4460466 8 Seal, Plug
219 to 228 Not Used
229 1 Holding Valve/Lift Dump Harness Assembly Options:
(Note: This is actually two separate harnesses under the
same p/n)
4922660 1 Standard & Sky Welder 2/D
4923597 1 With Arctic Package 1/A
229A 4460880 2 Connector, DIN
229B 4460320 1 Plug, Male - 2 Position
4460226 2 Socket, Female
229C 4460424 1 Connector, Female - 2 Position
4460267 2 Pin, Male
230 Not Used
231 1 Harness Options (To Bulkhead):
800S:
4922873 Harness, 110V A/C - Standard
4922790 Harness, 8/5 Cable - Sky Welder
1001091620 Harness, 8/5 Cable - With Arctic Package
4922790 Harness, 8/5 Cable - With 7500W Generator and Arctic
Package
860SJ:
4922877 Harness, 110V A/C - Standard
4922808 Harness, 8/5 Cable - Sky Welder
4923600 Harness, 8/5 Cable - With Arctic Package
4922808 Harness, 8/5 Cable - With 7500W Generator and Arctic
Package
232 1 Harness Options (To Generator Box):
4922874 Harness, 110V A/C (Standard)
4922809 Harness, 8/5 Cable (Sky Welder)
4923601 Harness, 8/5 Cable (With Arctic Package)
4922809 Harness, 8/5 Cable - With 7500W Generator and Arctic
Package
233 1 Harness, Limit Switch Lower Options (To Boom Transport
Length Limit Switch):
4922872 Standard & Sky Welder
4923599 With Arctic Package
20ft/6m Cable, Electrical - 18/2 Options:
1060902 Standard & Sky Welder
4923466 With Arctic Package
4460465 2 Socket, Female
4460891 1 Plug, Male - 2 Position
FIGURE 7-4. HARNESS COMPONENTS INSTALLATION (WITH UGM) (CONTINUED)
ITEM # PART NUMBER QTY. DESCRIPTION REV.