Parts Manual User guide

3121270 800S 860SJ 4-5
SECTION 4 PLATFORM
109 cont’d 1 Footswitch Assembly (Includes Footswitch, Electrical Cable,
Strain Relief Connectors and Connecting Terminals) Options
(See ELECTRICAL SECTION for Further Breakdown):
0272970 USA Built Machines SN 03000140000 to SN 0300161447
& China Built Machines SN B300000100 to
SN B300000640
B
1001117174 USA Built Machines SN 0300161447 to SN 0300182743 &
China Built Machines SN B300000640 to Present
B
109A 1060918 7ft/2.14m Cable, Electrical - 18/3
109B 1 Footswitch Options (Includes Footswitch & Items 112B &
112C):
Use 0272970 Ref USA Built Machines SN 03000140000 to
SN 0300161447 & China Built Machines
SN B300000100 to SN B300000640 (was p/n 4360031)
Ref Note: Assembly p/n 0272970 may use either p/n
4360031 or p/n 1001117320. If Original Equipment
was replaced as an “assembly,” p/n 1001117320
may have been used as part of the Service
Replacement. Identify component before ordering
parts.
1 Footswitch Less Cable Options:
4360031 Original Equipment
1001117320 Service Replacement
AR Block, Contact Options (see Note Above):
7000625 2 Contact Block for 4360031 Footswitch
70003483 1 Contact Block for 1001117320 Footswitch
1001117172 Ref USA Built Machines SN 0300161447 to SN 0300182743
& China Built Machines SN B300000203 to Present
70002902 1 Switch, 20Amp
70002903 1 Gasket
70002904 4 Replacement Kit, Bolt
70002905 1 Cover, Aluminum
109C 4460071 1 Connector, Strain Relief
Ref WORKLIGHTS INSTALLATIONS (OPTIONAL)
0273472 Ref 800S D
0273483 Ref 860SJ D
1001128153 Ref 860SJ (Worklights / Double Qty Listed for 4 Corner
Worklight)
A
201 2080040 AR Huck Fastener
202 to 203 Not Used
204 2920140 2 Worklight
7016399 2 Bulb, Replacement (1 Per Worklight)
205 to 206 Not Used
207 3536089 2 Plate, Mounting
208 to 212 Not Used
213 4460426 1 Connector, Strain Relief (Not Shown - Located at Console
Box)
214 to 216 Not Used
FIGURE 4-1. PLATFORM ASSEMBLIES (CONTINUED)
ITEM # PART NUMBER QTY. DESCRIPTION REV.