Parts Manual User guide

7-8 800S 860SJ 3121270
SECTION 7 ELECTRICAL
1001117400 Ref Australian & CE Specs Only With 7500W Generator and
Without Arctic Package
B
0275586 Ref All Specs Except Australian, CE & Japanese Specs Without
7500W Generator and With Arctic Package
B
1001091665 Ref All Specs Except Australian, CE & Japanese Specs With
7500W Generator and Arctic Package
E
201 to 206 Not Used
207 3573047 1 Plate, Receptacle Mounting
208 4360506 1 Proximity Switch and Harness Assembly
209 to 210 Not Used
211 4460470 1 Nut, Terminal
212 4460471 1 Lockwasher, Terminal
213 4460866 1 Connector - 19 Position
214 to 216 Not Used
217 1 Harness Assembly - Main Boom (12/4 -18/8) Options:
4922566 800S 2/B
1001091618 800S (With Arctic Package) 1/A
4922567 860SJ 3/C
4923595 860SJ (With Arctic Package) 1/A
AR Cable, Electrical - 12/4&18/8 Options:
1060896 85ft/26m 800S
4923462 85ft/26m 800S (With Arctic Package)
1060896 95ft/29m 860SJ
4923462 95ft/29m 860SJ (With Arctic Package)
2820031
4in/9cm
Heat Shrink
217A 4460465 11 Socket, Female 18 Gauge
217B 4460865 1 Connector - 19 Position
217C 4460509 4 Socket, Female 12 Gauge
217D 4460473 1 Clamp. Cable
217E 4460466 8 Seal, Plug
217F 4460464 11 Pin, Male 18 Gauge
217G 4460508 4 Pin, Male 12 Gauge
218 1 Harness Assembly - Tower Boom (12/4 - 18/8) Options:
4922569 Without Arctic Package 1/A
4923596 With Arctic Package 2/B
20ft/6.1m Cable, Electrical - 12/4&18/8 Options:
1060896 Without Arctic Package
4923462 With Arctic Package
218A 4460465 22 Socket, Female 18 Gauge
218B 4460865 2 Connector - 19 Position
218C 4460509 8 Socket, Female 12 Gauge
218D 4460473 2 Clamp. Cable
218E 4460466 8 Seal, Plug
219 to 228 Not Used
229 1 Holding Valve/Lift Dump Harness Assembly Options:
(Note: This is actually two separate harnesses under the
same p/n)
4922660 1 Without Arctic Package E
4923597 1 With Arctic Package 1/A
FIGURE 7-2. HARNESS COMPONENTS INSTALLATION (CONTINUED)
ITEM # PART NUMBER QTY. DESCRIPTION REV.