Parts Manual User guide

2-28 800S 860SJ 3121270
SECTION 2 TURNTABLE
230 AR Hose, Oil Drain Options:
1001091892 6in/15cm USA Built Machines SN 0300140000 to SN 0300141456
Only
2750532 1ft/0.3m USA Built Machines SN 0300141456 to SN 0300182743
Only & China Built Machines SN B300000100 to Present
Only
231 3.75gal Oil, Motor Options (Not Shown):
3020016 Without Arctic Package
3020044 With Arctic Package
232 3200362 2 Mount, Motor
233 3200406 2 Mount, Motor
234 Not Used
235 3311405 10 Locknut 1/4in-20NC
236 3311505 3 Locknut 5/16in-18NC
237 3311605 22 Locknut 3/8in-16NC
238 3311805 4 Locknut 1/2in-13NC
239 3537416 1 Plate, Engine Mounting (Front Right Side)
240 3539872 1 Plate, Radiator Mounting
241 3539971 1 Plate, Engine Mounting (Front Bottom)
242 1001093943 1 Plate, Engine Mounting (Rear)
243 Use 1001150998 1 Radiator (was p/n 3620033)
244 3740067 3 Relay
245 3960407 1 Gasket, Air Intake
246 3960468 1 Seal
247 3960469 1 Seal
248 4060805 37in/1m Flex-Trim
249 1 Engine, Deutz Options:
1001094101 Tier III/Tier IVi Engines (All Specs USA Built Machines
SN 030014000 to SN 0300170337 & China Built Machines
SN B300000100 to SN B300000753)
1001094101 Tier III/Tier IVi Engines (All Specs Except ANSI, CE & CSA
Specs USA Built Machines SN 0300170337 to
SN 0300182743 & China Built Machines SN B300000753
to Present)
1001137737 Tier IVi-Flex Engines (ANSI, CE & CSA Specs USA Built
Machines SN 0300170337 to SN 0300182743 & China
Built Machines SN B300000753 to Present)
1001144319 Tier IVi-PRE Engines (CE Spec Only USA Built Machines
SN 0300170337 to SN 0300182743 & China Built
Machines SN B300000753 to Present
250 1 Valve, Oil Drain Options:
Use 4640751 USA Built Machines SN 0300140000 to SN 0300141456
Only (was p/n 1001104308)
4640751 USA Built Machines SN 0300141456 to SN 0300182743
Only & China Built Machines SN B300000100 to Present
Only
251 4711400 6 Flatwasher 1/4in Thin
252 4711600 3 Flatwasher 3/8in Thin
253 Not Used
254 4740274 4 Washer, Snubbing
255 4751400 8 Flatwasher 1/4in Regular
256 4751600 44 Flatwasher 3/8in Regular
FIGURE 2-6. DEUTZ ENGINE INSTALLATION (CONTINUED)
ITEM # PART NUMBER QTY. DESCRIPTION REV.