Operator Manual Owner's manual

SECTION 3 - MACHINE CONTROLS, INDICATORS AND OPERATION

3-16 – JLG Lift – 3121135

Battery Charge/Fault Code LED Indicator

On normal power-up and operation this series of LEDs

visually indicates the amount of charge left in the batter-

ies.

• (+) GREEN LEDs lit indicate maximum charge.

• (–) RED LED’s lit indicate minimum charge remaining.

• The number of LEDs lit will change depending on the

level of charge in the batteries.

If battery voltage falls below 16.8 volts a fault condition will

occur and the machine will stop operating. The batteries

will need recharged.

NOTE: LED Fault Code indications are in Table 3-3, LCD

Display - Operating Fault Conditions, this section of

the manual.

Driving Machine

WARNING

WHEN DRIVING WITH PLATFORM LOWERED, DO NOT ATTEMPT

TO DRIVE MACHINE UP A RAMP (GRADE) OF GREATER THAN

TWENTY PER CENT(20%), AS TIPPING COULD OCCUR.

1. Enter the platform.

–+

POINT & GO

The Joystick can be

moved in any direction

off center.

Drive Power is applied

proportionally the fur-

ther the Joystick is

moved off center.

2. PRESS and RELEASE the

Drive Function Button. The

flashing LED indicates the

function is active. The function

remains active 3 to 4 seconds.

3. While the Drive Function is

active. PRESS and HOLD the

enable button on top the joy-

stick

4. Move the joystick in the

desired direction of travel. TO

STOP the machine return the

joystick back to center.

POINT G