Parts Manual Owner manual

3120773 E300A E300AJ E300AJP 4-7
SECTION 4 PLATFORM
FIGURE 4-2. PLATFORM COMPONENTS INSTALLATION (SIDE ENTRY)
ITEM # PART NUMBER QTY. DESCRIPTION REV.
Ref PLATFORM ASSEMBLIES:
Use 1001144026 Ref 30in X 5ft (76cm x 1.52m) with No Mesh (was p/n 3510831) B/L
Use 1001144027 Ref 30in X 4ft (76cm x 1.22m) with No Mesh (was p/n 3510830) B/M
Ref Note: Original Equipment platform may have been replaced
with Service Replacement platform. Identify platform before
ordering parts.
Ref Note: Platform and Mesh must be ordered separately for
Platforms with Mesh. See Section 10 for Mesh Installations.
Ref NOTE: REPLACEMENT DECALS MUST BE ORDERED
SEPARATELY - SEE SECTION 8.
1Not Used
2 2080040 16 Fastener, Huck
3 2600281 2 Hinge, Self-Closing
4 2940074 1 Latch
5 3311001 4 Nut #10-24NC (Prior to SN 0300077390)
6 See Note 1 Platform Weldment
(Note: Not Available - Purchase Platform Assembly)
7 3520072 1 Cap-Plug
8 4 Hardware Options:
3911008 Screw #10-24NC x 1in (Prior to SN 0300077390)
3820020 Rivet, Pop (SN 0300077390 to SN 0300138358)
9 4751000 8 Flatwasher #10 Regular (Prior to SN 0300077390)
10 1 Gate Weldment Options:
4846452 Platform p/n 3510830 & p/n 3510831 (Original Equipment)
1001144629 Platform p/n 1001144026 & p/n 1001144027 (Service
Replacement)
11 3520198 2 Cap-Plug
12 Not Used
13 4761000 4 Lockwasher #10 (Prior to SN 0300077390)
Ref PEDESTAL PANEL & FOOTSWITCH INSTALLATIONS
Ref E300A & E300AJ MODELS
0272082 Ref ANSI Spec A
0272105 Ref UL Spec A
Ref E300AJP MODELS
0272106 Ref ANSI Spec A
0272104 Ref UL Spec A
101 0641406 4 Bolt 1/4in-20NC x 3/4in
102 0641408 3 Bolt 1/4in-20NC x 1in
103 0641610 4 Bolt 3/8in-16NC x 1-1/4in
104 1 Console Box Assembly (Not Shown - See Platform Console
Assembly for Breakdown)
104A 4360031 1 Footswitch
7000625 2 Block, Contact
3252347 1 Nameplate (Note: See Section 8 for Other Languages)
104B 1060330 7ft/2.2m Cable, Electrical 16/3
104C 4460071 1 Connector, Strain Relief
105 3311405 7 Locknut 1/4in-20NC