Operator Manual User guide

Section 3 - Controls and Indicators

3-1331200744

G9-43A If Equipped, G10-43A

The boom joystick (1) controls the boom, attachment tilt and clutch lock functions.

Boom Functions

• Move the joystick back to lift boom; move joystick forward to lower boom; move

joystick right to extend boom; move joystick left to retract boom.

•

Speed of boom functions depends upon amount of joystick travel in corresponding

direction. Increasing engine speed will also increase function speed.

• For two simultaneous boom functions, move the joystick between quadrants.

For example; moving the joystick forward and to the left will lower and retract

boom simultaneously.

Attachment Tilt Function

Attachment tilt is controlled by the roller switch (4).

• Push roller switch up to tilt attachment down; push roller switch down to tilt

attachment up.

Clutch Lock

Clutch Lock is controlled by the joystick trigger (5).

• Squeeze and release trigger once to disengage the transmission. Quickly

squeeze and release trigger twice to re-engage the transmission.

OY3210