Operator Manual User guide

Section 5 - Attachments

5-10 31200744

Mechanical Quick Switch

This installation procedure is designed for one-person operation. Prior to exiting cab,

perform “Shut-Down Procedure” on page 4-4.

1. Tilt quick switch back to provide clearance.

Check to be sure lock pin is removed.

2. Align attachment pin with recess in attachment.

Raise boom slightly to engage attachment pin

in recess.

3. Tilt quick switch forward to engage attachment.

4. Lift retainer pin and insert lock pin completely

through quick switch. Release retainer pin and

ensure lock pin is secured.

5. If equipped, connect auxiliary hydraulic hoses. See “Hydraulic Operated

Attachment” on page 5-12.

6. If equipped, connect auxiliary electric harness.

OY1550

OY1560

OY15

OY1580