Operator Manual Owner's manual

TABLE OF CONTENTS
TRANSFORMER SERIES WORK PLATFORM
IMPORTANT SAFETY NOTICE ..................................................... inside front cover
TABLE OF CONTENTS
INTRODUCTION
SAFETY ................................................................................. P1.0
DECAL LOCATIONS .................................................................. P2.0
DECALS ................................................................................. P3.0
NOMENCLATURE ..................................................................... P4.0
WORK PLATFORM INSTALLATION............................................... P5.0
CHECKS BEFORE USING .......................................................... P6.0
WARM-UP & OPERATIONAL CHECKS .......................................... P6.1
DAILY “WALK-AROUND INSPECTION” ......................................... P6.2
DAILY REAR AXLE LOCK-OUT TEST PROCEDURE ......................... P7.0
PLATFORM CONTROLS & INDICATORS ....................................... P8.0
PLATFORM OPERATION ............................................................ P9.0
EMERGENCY PROCEDURES ....................................................... P10.0
Important Notice !
This machine has been equipped with a serial number specific Transformer Series
Personnel Work Platform. Do not exchange transformer platforms between
machines. Doing so will require calibration changes to the controller that must be
performed by a qualified service technician. This platform assembly is designed
soley for use with the
Transformer Model Machines only.