User Manual

93
BOOM LIFT MODELS X14J
JLG
X14JR0420113
6.6 ELECTRICAL DISCONNECTION OF THE REMOTE CONTROL
The electrical disconnection/connection operations of the machine remote control MUST
be carried out exclusively with the engine key in the OFF position and with the mains
electricity disconnected.
• Disconnect the cable from the remote control using the relevant screw connection.
• Make sure there is no humidity in the remote control side connector and close the remo‑
te control side seal plug.
• Make sure there is no humidity in the electric cable side connector and close the electric
cable side seal plug.
NOTE: it is very important to close both connectors with the relating plugs in order to avoid
that enters humidity.
To reconnect the remote control follow the process in the opposite direction.