Service Manual Owner's manual

SECTION 5 - HYDRAULICS
5-28 – JLG Lift – 3121448
First section seals replacement
Use clean grease on the pressure plate to help the seals
stay in place before fitting them.
Figure 5-83.
Fit the new seal (1) and back-up ring (2) on the plate.
Figure 5-84.
Fit the new seal (1) and back-up ring (2) on the plate.
Figure 5-85.
Place on the body the new seals. Use clean grease to
keep the seal in place.
Figure 5-86.
1
2
2
1