User's Manual

Lightning Strike User Manual
Battery installation
For Lightning Strike:
Turn the latch to the left or right.
Remove the screw and open the battery cover.
Insert 3x 1.5V AAA Alkaline batteries and close the battery cover.
Put the screw back, turn the latch back and lock the battery cover.
For Remote Controller:
Remove the screw and open the battery cover.
Insert 2x 1.5V AA Alkaline batteries and close the battery cover.
Put the screw back.
Operation procedure
Put the Lightning Strike on the water and make sure the
frequency docking successfully when the speedboat and the
controller are turned on.
Use the remote controller to control the Lightning Strike
The speedboat will move forward when you press the
up button in left side.
The speedboat will move backward when you press the
down button in left side.
The speedboat will turn left and forward when you press the
up button in left side and left button in right side.
The speedboat will turn right and forward when you press
the up button in left side and right button in right side.
The speedboat will turn left and backward when you press
the down button in left side and left button in right side.
The speedboat will turn right and backward when you press
the down button in left side and right button in right side.

Summary of content (3 pages)