User's Manual

1
4CH 1:24 Racer User Manual
Battery installation
For Racer:
Remove the screw and open the batteries cover.
Insert 3*AA batteries (1.5V) and close the batteries cover.
Put the screw back and lock the batteries cover.
For Remote Controller:
Remove the screw and open the batteries cover.
Insert 2*AA batteries (1.5V) and close the batteries cover.
Put the screw back and lock the batteries cover.
Operation procedure
Put the racer on the floor and make sure the frequency docking successfully when the car and the controller are
turned on.
Use the remote controller to control the racer.
The racer will move forward / backward when you push up / down on the left joystick.
The racer will turn left / right when you push left / right on the right joystick.
Notes:
Please make sure the car and remote controller within 16 feet range.
Age Recommendation: 10+ years and adult supervision required.
If you do not play the car, you must remove the batteries from both of the remote controller and the car.
Packaging includes:
Racer unit 1pc
Remote controller unit 1pc
Product dimension:
Racer unit: 6.5”W*3”D*2.5”H
Remote controller unit: 4.25”W*3”D*1.75”H