Product Manual

will automatically attempt to pair and connect. If the pairing is successful, the projector
interface will display the corresponding prompts.
 If the indicator light turns off and there are no prompts on the screen, the pairing has failed
and you will have to try again.
 If you were unable to pair the remote control during initial setup, you can do so manually
within the first 5 minutes of startup. The name of the Bluetooth remote control on the pair
screen should be RemoteControl.
 Enter the settings page through Settings > Bluetooth > Bluetooth Pairing. Center Shortcut
and Settings keys at the same time. After the remote control indicator starts to flash, select
Refresh from the OS Bluetooth interface. Look for the device named RemoteControl, then
select Connect.
 Once you have paired your remote control with Bluetooth, the voice control function will
become available.
b) Remote Control Indicator
 During Bluetooth pairing, the indicator will flash for 0.5 seconds. After successful pairing,
the indicator will display a constant light for 2 seconds. If the pairing fails, the indicator
switches off.
 When the battery is less than 10%, the indicator will flash twice at a 1-second interval, then
flash cyclically at 0.2-second intervals.
 When charging, the indicator will start pulsating.
8) Bluetooth Speaker Function
 This product can be used as an independent Bluetooth speaker. Press On > Bluetooth
Speaker on the remote control to enter Bluetooth speaker pairing mode. The indicator should
start pulsating in blue.
 Enable Bluetooth on the playback device, then scan for available Bluetooth devices. Find and
pair with the device named JMGO. The pulsating indicator should switch to a solid blue.
 When the pairing is successful and Bluetooth is connected, the volume can be adjusted
through the volume key of the remote control.
9) System Updates (online and offline supported)
a) Online Update: Head to Settings > System > Update Version. The system will automatically
detect if your software is up-to-date. You will receive a prompt if the software is already the
latest version. If your software is out-of-date, you will be asked if you wish to update it.