User's Manual

. Press the blue button No. for
one second to turn on the
Bluetooth/
Mic/Power display. The
Bluetooth light on the
bottom flashes quickly to
indicate that it is not connected.
Then turn on the Bluetooth in
the device you want to connect
to the speaker and search for
the ML-05G Bluetooth speaker
device in the Bluetooth settings.
After the connection is
successful, the Bluetooth light
will stay on and the music
starts playing. When the volume
is adjusted on the mobile phone
or any other device that is
connected to the speaker, the
Bluetooth light will flash
slowly.
Dimensions
Features
★ Inner high-capacity batteries, long battery life
★ Taiwanese technology speakers, stereo Hi-Fi sound
★ The bass is strong, the midrange is sweet, and the treble is
clear.
★ Bluetooth lossless audio, real sound.
★ The size of the two-segment light source can be adjusted,
and the flashing mode is included.
★ Suitable for mountaineering, camping, street dancing,
. Do not look at the LED light source or
shine on the eyes of others to avoid eye
discomfort.
. LED light source will produce temperature
, please do not irradiate flammable
materials such as lighters, oxygen tanks or
balloons for a long time to avoid danger.
. When using this product, please pay
attention to avoid reduce LED light source
life because Heat accumulation for there
is a barrier to cover the LED light source.
JM
LED
ML-05G-01
User's Manual
LIGHTSONG
Lighting + music + singing
Three in One
Operating Instructions
. Turn on the red button No. to activate the LED lighting. As per
the default setting the 4w lighting will be turned on, press
again to switch to 1w lighting, press three times for the blinking
mode, If the button No.1 is pressed four times, the LED light
gets switched off.
2
2
3
3 4 5
6
7
1
LED Lighting mode
Status light display description
A total of 7 indicator lights form left to right
70%
Power
50%
Power
30%
Power
10%
Power
Bluetooth
light
Full
Power
Charging
Bluetooth speaker
. Unplug the pink protective cover , insert the 3.5mm connector microphone, and press the blue button for one
second to activate the Bluetooth/
Mic/Power display. With the button ,the microphone volume can be controlled. Short
press once to decrease the volume, and twice to increase the volume. By pressing the button ,the ECHO can be
activated. There are three types of echo sizes from 1 to 3. Press four times to turn off the echo.
Microphone amplification mode
. Unplug the protective cover , insert the USB Type C connector, use a mobile power bank or travel charger (DC 5V), and
charge the device. In the charging state, the lower red light is on. Once the battery is fully charged, the the red light will
turn off, and the green light on the left will be on. The charging protection device will be automatically cut off. If you
need to check the battery level, press and hold the button for about 1 second to display the battery level on the
position light .
Charging method
1
4
6
3
7
5
3
Mic in
Hi-Fi high-quality
speakers
High-performance
LED wick
Type C USB
Mic volume
ECHO switch 3 stages
LED
switch
2 stages/
Flashing
Bluetooth switch/Mic switch/Power display
pressed for one second to switch on
210 degrees
Large hook
Anti-slip anti-scratch
foot cover.
106mm
104mm70 mm58mm
outdoor sports, etc.
★ The sound has a great bass and is very clear when the
speaker is connected to computers, mobile devices,
movie theaters, or when listening to music.
★ KTV, practice songs, guided audio, speakers, the ML-05G
has all of it.
★ All aluminum alloy cavities are covered, the sound is
clean, and the heat dissipation is excellent.
LED Bodyx1、USB Cablex1
Irradiate Notice
Product Contents
Model
Light Source
Driver
Battery
Protection
luminous flux
LED Watt
Color temperature
Beam Angle
CRI
Speaker power
Dimension
Material
Weight
ML-05G-01
LED COB Integrated
USB Type C (DC 5V)
Lithium battery 2600mAh x1 (2600mAh x2 option)
Overcharge, Overdischarge, Short Circuit
Up to 500 lm
4W / 1W / Flash mode
5500K / 3000K
90°
＞70Ra
3W x2
128(L) x 104(W) x 106(H) (With hook)
76(L) x 104(W) x 106(H) (No hook)
Anodized Aluminum, PC Plastic
465 g
Precautions Warranty Notice
FCC Statement
. In order to avoid any risk, please charge the UV light at a dry, safe & steady place. No high ambient temp
and damp place allowed.
. Warranty void if product dismantled.
. Do not use a charger with a voltage exceeding DC 5V/2A for charging to avoid the risk of damage to the
circuit protection board.
. Please use the hanger properly and firmly to avoid the risk of UV light falling.
. To avoid any damage, please do not drop the product from high position or press by heavy object.
. Adult assistance is suggested when kids use the light.
. To prevent damage of the battery due to discharge, the light should be charged every 6 months when the
light is stored over a long period of time.
1. The UV light warranty is 24 months starting from the purchase day. The limited warranty of Lithium-ion
battery is 6 months, respectively.
2. Please keep the invoice for warranty purpose.
3. The handling charge or repairing fee will be advised while the goods return in the following condition:
(1) The circuit board damage caused by over 5V/2A DC charger.
(2) The lithium battery can reach 500 charging cycles, therefore decay of the lithium ion battery is normal
and not covered by the warranty.
(3) Warranty void if the goods applies and damaged in the high temp, salty damp or sulfur environment.
(4) Warranty void if product falling, improper storage, dismantle, human-misuse.
(5) No warranty if the damage caused by inevitable catastrophe, such as earthquake, flooding, fire or
others.
Warranty Letter Please send the RMA goods with the invoice for warranty purpose to following address:
Buyer’s name
Buyer’s Telephone
Buyer’s address
Purchase Shop or Place
Product
failure status
and details
Recycle Batteries
1
YEARS
Body
Warranty
Manufacturer：SUNYEER TECHNOLOGY CO., LTD.
Address ：No. 1, Wenming 3rd Street,
Guishan District, Taoyuan City
Service line ：[phone]
Web site ：www.jmled.tw
6
MONTHS
Battery
warranty
RoHS
R43942
13439
CCAR21LP0050T0
2AY6DML-05G-01
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
KDB447498 D01 v05r02 (P5)
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it
also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in
accordance with provided instructions and the antenna(s) used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons and must not be co-located or operating
in conjunction with any other antenna or transmitter. End-users and installers must be provided with
antenna installation instructions and consider removing the no-collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.