- JMR Electronics Network Adapter Installation Guide 1U SCSI JBOD

The 4-bay StorBlade
TM
1U SCSI JBOD enclosure is designed for use with a
host system to provide a high-end storage solution. The following is a summary
of the 4-bay 1U enclosure features:
• The 4-bay StorBlade
TM
1U SCSI JBOD Rackmount enclosure is a four
drive enclosure that supports up to four 3.5" LP (Low-Profile) SCA (80-
pin) drives. It supports single-ended, Ultra2 SCSI, and Ultra 160 SCSI.
The SCSI enclosure has two SE/LVD (single-ended/Low Voltage
Differential) Channels.
2/4/6/8/10/12/15-bay Product Family Features
FORTRA

and StorBlade
TM
are families of high-end enclosures designed for
high-volume performance storage solutions. The following table shows the
features of the FORTRA

2/4/6/8/10/12/15-bay and the StorBlade
TM
products:
SSttoorrBBllaaddee
TM
SCSI JBOD Installation Guide Rev A
1-1
1. Introduction
2-bay
4-bay
1,3
6-bay
*1,3
8-bay
1
10-bay
*1,2
12-bay
15-bay
*1,3
StorBlade
Number of Device Bays 2 4 6 8 10 12 15 4
Number of Blowers 1 1 1 or 2 2 2 2 2 2
Number of Power Supplies 1 1 1 or 2 2 2 2 2 1 or 2
Number of I/O Channels (SCSI Only) 1 1 2 2 2 2 2
SCSI SE/LVD Supported
2 2 2 2 2 2 2
Fibre Channel Supported
2 2 2 2 2 2
Hot-Swap Canisters
2 2 2 2 2 2 2 2
Removable Power Supplies
2 2 2 2 2 2 2
Fibre only
Removable Blowers
2 2 2 2 2 2 2
Fibre Only
N+1 Power Supplies
2 2 2 2 2
Fibre only
N+1 Blowers
2 2 2 2 2 2
MIA Support (FC Only)
2 2 2 2
Loop Expansion Support (FC Only)
2 2 2 2 2 2
Daisy Chainable (SCSI Only)
2 2 2 2 2 2
Built-in Termination (SCSI Only)
2 2 2 2
Auto Termination (SCSI Only)
2 2 2 2
SAF-TE/SES Ready (Optional)
2 2 2 2
Fibre only
SAF-TE/SES Compatible
2 2 2 2
Fibre only
SCSI to SCSI RAID Support
2 2 2 2
Fibre to SCSI RAID Support
2 2
Fibre to Fibre RAID Support
2 2 2
Fibre to ATA RAID Support
2
SCSI to ATA RAID Support
2
(D)esktop/(T)ower/(R)ackmount D D DTR T TR R TR R
* 6/10/15-bay unit features apply to both Tower and Rackmount models
1 Features are based on a standard configuration with no internal host controller(s) installed
2 Fibre channel 10/15-bay enclosures have built-in SES
3 Fibre Channel 2Gb Model available. 2Gb models use SFP transceivers.