User Manual
Table Of Contents
- Foreword
- 2. Instructions
- 3.Installation and Connection
- 4.System Function Introduction
- 4.1 Switch Machine
- 4.4 IPC Settings
- 5 Mobile P2P Access
- 6.Appendix
Operation Manual of Wireless NVR Kit
28
【CAM】 Select the corresponding channel number to set the channel, and set all channels in a unified
way.
【Period】 The device will trigger the motion detection alarm signal within the set time range
【Show Message】 On the NVR preview screen, a dialog box for prompting alarm information will pop
up;
【Buzzer】 When the alarm occurs, the device emits two long beeps.
Motion Detect
:
【CAM】 Select the corresponding channel number to set the channel, and set all channels in a unified
way.
【Period】 The device will trigger the motion detection alarm signal within the set time range
【 Delay(s)】 When the video is lost, it means that when the alarm is over, the alarm will stop for an
extended period of time, ranging from 10 to 300 seconds;
【Show Message】 On the NVR preview screen, a dialog box for prompting alarm information will pop
up;
【Buzzer】 When the alarm occurs, the device emits two long beeps.
【Record Channel】 Select the channel to set the motion detection area;