User Manual

Operation Manual of Wireless NVR Kit
10
disk recorder. It is recommended to use a regulated power supply.
Explanation: Before turning on, please make sure that a monitor or monitor is connected to the video output port of the
device.
Specific boot steps are as follows:
1 Plug in the power supply, the power indicator on the
front panel is red.
2 Device starts to boot, the boot screen is as shown below:
4.1.2 Log In
After the system is turned on and started, after the system is initialized, the system automatically displays the image
preview interface. The login interface pops up automatically after the user's operating system. As shown below. The user
needs to complete the login before proceeding.