User Manual
Table Of Contents
- Foreword
- 2. Instructions
- 3.Installation and Connection
- 4.System Function Introduction
- 4.1 Switch Machine
- 4.4 IPC Settings
- 5 Mobile P2P Access
- 6.Appendix
Operation Manual of Wireless NVR Kit
12
4.1.4 Logout
If you need to log out the user during use, you can right-click the shortcut menu, choose to shut down the system, and click
logout to complete.
The user needs to re-enter the user name and password when logging out of the system and operating again.
4.1.5 Reboot
If users need to restart the machine during use, they can right-click the shortcut menu, choose to shut down the system and
click restart to complete.
4.1.6 Shut Down
If users need to shut down the system during use, they can right-click the shortcut menu, choose to shut down the system,
click to shut down the system to complete.
4.2 Boot Wizard
After successful login, the system will automatically open the "Setup Wizard" interface to guide the user to make basic
settings, so that the machine can work normally.
operating step:
1、Setting 1: setting wizard. Can set whether to open the boot wizard. The setting interface is as shown in the figure below,
after the operation is completed, left click the next button.