User Manual
Table Of Contents
- Foreword
- 2. Instructions
- 3.Installation and Connection
- 4.System Function Introduction
- 4.1 Switch Machine
- 4.4 IPC Settings
- 5 Mobile P2P Access
- 6.Appendix
Operation Manual of Wireless NVR Kit
18
Steps:
1、I Right-click the main interface of the system, select 【IPC Config】 in the pop-up right-click menu,
and the image setting interface opens by default;
2、The user adjusts the camera image parameters according to his needs, click【Apply】, and then click the
【OK】 button to save the user modified parameters. As shown below:
4.4.2 Preview Settings
Function description: IPC equipment channel title switch, channel position, channel name, font size, time
title switch, time position, time automatic size setting.
Operation steps: On the IPC configuration interface. Click the【Live Set】title, click to enable or disable
the channel title, and the time title is displayed. Set the title position and font size. Click 【Apply】 and
then click 【OK】 to save the setting parameters. As shown below：