User Manual
Table Of Contents
- Foreword
- 2. Instructions
- 3.Installation and Connection
- 4.System Function Introduction
- 4.1 Switch Machine
- 4.4 IPC Settings
- 5 Mobile P2P Access
- 6.Appendix
Operation Manual of Wireless NVR Kit
20
4.4.4 Advanced Settings
Function description: IPC equipment motion detection and humanoid recognition switch, sensitivity
adjustment and area setting.
Operation steps: On the IPC configuration interface. Click the 【Advanced】 heading to enter the
advanced settings interface. You can manually turn on or off the motion detection and humanoid recognition
functions, adjust the sensitivity level, and set the motion detection and humanoid recognition areas. As
shown below:
4.4.5 Camera Upgrade
Function description: IPC camera program version upgrade.
Operation steps: In the IPC configuration interface, click the 【IPC Upgrade】 title to enter the camera
upgrade interface, place the IPC program to be upgraded in the root directory of the U disk, insert the U
disk into the NVR host, and refresh the U disk status on the device upgrade interface. Select the program
that needs to be upgraded and click Upgrade. The device will automatically restart after the upgrade. As
shown below：