User Manual

Operation Manual of Wireless NVR Kit
23
【Round Robin】Click on the round robin to enter the round robin setting interface. You can enable round
robin and set the round robin interval time. There are up to 32 round robin schemes. Each round can be
customized to add channels that need round robin.
【Tour】Can set alarm polling time interval;
【
Return After The Alarm
】
The mark indicates that it is selected. After the alarm is over, the tour will
exit and return to the main interface.
Operation steps: Use the mouse to click the option that needs to be modified, check, switch or manually
input the value that needs to be modified, and click the
【
Save
】
button to take effect.
4.5.3. Record Mode
Function description: Set NVR recording plan parameters.
【CAM】Select the corresponding channel number to set the channel, for all channel settings, select the
full;
【Prerecorded(s)】Record 1-30 seconds before the recording action state occurs (the length of time may
vary due to the size of the stream);
【Delay(s)】After the recording action setting starts, the recording will be delayed for a period of time;
【 Audio coding 】 The mark indicates that the recording is enabled, and the audio encoding of the
recording is enabled.
【Mode Brush】
Timed Record: perform ordinary recording within the set time period
Moving Record: record the motion detection alarm period within the set time period
Not Record: no video will be recorded within the set time period.
【Copy】Reproduce the recording settings of one channel to other channels.
【Restore】Restore recording settings to system default.