User Manual
Table Of Contents
- Foreword
- 2. Instructions
- 3.Installation and Connection
- 4.System Function Introduction
- 4.1 Switch Machine
- 4.4 IPC Settings
- 5 Mobile P2P Access
- 6.Appendix
Operation Manual of Wireless NVR Kit
25
【DHCP Enable】 After checking, automatically obtain the IP function (not recommended); Note: the
device needs to be connected to the router. Unchecking requires the user to manually set the IP
information.
【IP Addr】 In manual mode, set the IP address of the device;
【Subnet Mask】 In manual mode, set the subnet mask of the device;
【Gateway】 In manual mode, set the default gateway of the device;
【DNS Settings】 The domain name resolution server is used to resolve the domain name into an IP
address. The address is provided by the network operator where you are located. After setting the address,
you need to restart to take effect;
【HTTP Port】 The default is 80;
【TCP Port】 The default is 6001;
【P2P ID】 You can enable the Tuya UUID/view the Tuya account connection status.
【 Advanced 】 NVR equipment NTP time, PPPOE setting, Email alarm setting, DDNS setting, Telnet
service switch.