User Manual

Operation Manual of Wireless NVR Kit
33
【Channel Selection】 Select the specified channel to record.
【Full Screen Mode】Mouse click all full screen to enter the full-screen playback interface
【File Backup】 Jump to the backup interface for the backup operation. Click the button to pop up
Figure 3.5, you can follow the instructions below. Note: Before backing up files, you need to install a
storage device that is sufficient to hold the stored files; the backup is terminated midway, and files that
have been copied to the storage device can be played back independently.
【Play Ratio】 Display the speed multiple of fast or slow playback.
【Stop Playing】 Video recording stops playing.
4.7 PTZ Control (Reserved Function)
Function description: Use the NVR to control the camera pan/tilt rotation, zoom, preset position, cruise
and other operations.
Operation premise:
Before users control the IP camera or PTZ, please make sure that the camera supports PTZ control function
and the network with the NVR has been connected normally.
Steps:
1. Right-click on the main interface and select PTZ control in the shortcut menu to enter the PTZ control
interface. As shown below:
2. Support PTZ direction control, zoom, focus, iris adjustment, preset call, you can enter the sub-menu to
set the cruise path, run cruise.