User Manual Version 1.
Caution Precautions and maintenance For indoor use only To avoid risk of fire or electric shock, do not expose the unit to moisture or condensation. To avoid overheating, do not block the ventilation holes on the back of the Photo Display. Keep the Photo Display out of direct sunlight. Always use the eject buttons on the memory storage card slots to remove the storage cards. Do not dismantle the Photo Display. There is a risk of electric shock and there are no user-serviceable parts inside.
Introduction: Thank you for your purchase of the Photo Display NANO 10. It is designed to allow quick and easy view of photos taken from your digital camera, mobile phone, or from a memory storage card. Please read this User Manual carefully to learn the correct way to use the Photo Display NANO 10.
CONTENT 1. Product Overview ....................................................................................... 5 1.1 Remote Control ..................................................................................... 5 1.2 Touch Buttons ...................................................................................... 6 1.3 Right Side of Frame ............................................................................... 6 1.4 Left Side of Frame ................................................
1. Product Overview 1.1 Remote Control 1. Power = Power On/Off 2. SETUP = Go directly to Setup mode. 3. Rotate = In the photo mode, press this button, the picture will rotate 90 in counterclockwise. 4. UP arrow = Scroll pictures in up/down mode. Also use to make menu selections during programming and setup. 5. Zoom = In single picture mode, magnify or reduce picture display size. 6. LEFT arrow = Use for menu selections in Startup, Setup, Thumbnail, Music and Video modes.
1.2 Touch Buttons 1. Power On/Off 2. Menu 3. Up Arrow 4. Down Arrow 5. OK / Play / Pause 6. Left Arrow 7. Right Arrow 8. Exit 1.3 Right Side of Frame 1. SD/ MMC /MS card slot 1.4 Left Side of Frame 1. DC 9V (Power Input) 2. MINI USB 2. Installing & Replacing the Battery Place the upside of the remote control down, press down on the ridged area of the battery cover and pull towards you to remove the tray.
3. Getting Started Put the Photo Display NANO on stand, then plug one end of the included AC adapter into a standard 110-240V AC electrical outlet and the other end into the right side the frame. Remove the protective film covering the LCD. Remove the plastic battery insulator from the battery compartment and make sure the remote control has a battery inside. Please refer to “Installing & Replacing Battery” if you need a new battery.
Card Selection Screen 5. Main Menu After you have selected the photo source you enter the main menu. Here you can choose between Slide Show, Photo or Calendar. Using the arrow buttons “left” and “right” you can select your choice. Press OK to confirm your selection. Main Menu 5.1. Slide Show Choosing this function will playback all photos from the selected source in a slide show. Press OK to confirm and start the show. 5.2.
Thumbnail view 5.3. Calendar The calendar function allows you to use the Photo Display NANO as a regular clock and calendar. Your photos are shown as a slide show on the left hand side. Using the arrow buttons you can move through the calendar. When you want to change the clock or date, please press EXIT button to exit this calendar Interface, then press SETUP button to enter "set time" menu. Use EXIT button to exit calendar show. 6.
The following options are available: o Image size This function allows you to optimize the way how to display a photo. There are 3 different ways: Auto fit, Optimal and Full o Slideshow effect You can choose form 16 various transition effects. o Slide show interval The slideshow interval gives you the opportunity to change the time between the transistion effects.
7. Technical Specifications Screen Size 10.4 inch TFT Aspect Ratio 4:3 Brightness 250cd/m2 Response Time 20ms Viewing Angle 60°(left/right/vertical), 40°(horizontal) Working Temperature 0℃~40℃, Humidity: 10-85% Panel Resolution 800 x 600 Pixel Contrast 500:1 AC Adapter Input: AC 100-240V 50/60HZ Output: DC 9V/2A Supported Photo Format JPEG Supported Memory Card SD/MS/MMC USB Port USB Host (high speed 2.0 connected with the short USB Cable) 8.
Substance of warranty 1. In the event of malfunctioning caused by manufacturing defects JOBO AG will repair or replace the defective product at its own discretion. 2. JOBO AG and its suppliers do not assume any liability for data losses occurring during operation of the device or consequential damage resulting from this.
