Operation Manual

7
3. Getting Started
 Put the Photo Display NANO on stand, then plug one end of the included AC adapter
into a standard 110-240V AC electrical outlet and the other end into the right side
the frame.
 Remove the protective film covering the LCD.
 Remove the plastic battery insulator from the battery compartment and make sure
the remote control has a battery inside. Please refer to “Installing & Replacing
Battery” if you need a new battery.
 Then the screen will display as following: If there are JPG files in the memory card or
build-in memory, the player will wait for a moment and then start the slideshow.
JOBO starting screen
4. Memory Card Selection Screen
In the Memory Card Selection Screen you can choose the source for your images. To enter
this menu press Exit twice. Using the arrow buttons “left” and “right” you can select a
memory CARD or a connected USB Disk. Press OK to confirm your selection.