Photo Display PDJ077 User’s Manual
TABLE OF CONTENT Introduction .....................................................................................................................................................................................................................................1 Important Safety Precautions......................................................................................................................................................................................................
Frequently Asked Questions .......................................................................................................................................................................................................17 Technical Specification ...............................................................................................................................................................................................................19 Contact/Service .................................
Introduction Congratulations on your purchase of this JOBO Photo Display PDJ077. Before operating this unit, please read this manual thoroughly and keep it for future reference. This manual will help you use all of the exciting features to make your Digital Photo Frame view more enjoyable. The PDJ077 is compatible with SD, MMC, MS and CF memory card formats, which enables you to view digital photo directly from your camera’s memory card.
Important Safety Precautions Always follow these basic safety precautions when using your Digital Photo Frame. This will reduce the risk of fire, electric shock, product damage and personal injury. y Warning: To reduce the risk of electric shock, do not remove the cover or back. There are no user-serviceable parts inside. Refer servicing to qualified personnel. y y Warning: To prevent fire or electric shock hazard, do not expose the unit to rain or moisture.
Cleaning y Before cleaning the product make sure it is turned off. y Never spray or pour liquid directly onto the screen or plastic casing. y To clean fingerprints and dust from the screen, a clean, soft, non-abrasive cloth such as lens-cleaning cloth is recommended. If it still is not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner on the lens-cleaning cloth to wipe the screen. y To clean the plastic casing, use a soft, dry cloth.
Location of Control Buttons 1. SD/MMC/MS -card slot 2. CF-card slot 3. [j] Press to move the cursor down or select the next 8. display the OSD menu while playing photos. 9. picture. 4. [M] Press to return to the main menu. Press and hold to [X] Press to start or pause slideshow or confirm the selection. [i] Press to move the cursor up or select the previous 10. Power On/Off switch picture. 11. USB HOST for connecting the USB device directly. 5.
Remote Control 1 Press to turn the player on or to standby mode. 2 a Press to move the cursor upward or select previous picture. 3 _ Press to move the cursor leftward or rotate the picture. 4 MENU Press to return to the main menu. 5 b Press to move the cursor downward or select next picture. 6 Press to select the previous picture during viewing pictures or switch to previous page in thumbnail mode. Press to zoom in the picture.
Getting Started Remote control preparation The supplied lithium battery has already been inserted into the remote control. Pull out the protective sheet from the battery compartment to activate the battery. The remote control is now ready for use. If the remote control stops working, follow the procedures below to replace the battery with a new one. 1. Place the Remote Control with the buttons facing downward. 2. While pressing the movable left part of the battery cover to the right, pull the tray out.
Inserting media Insert the SD/MMC/MS card into the 3-in-1 card slot with the metallic contacts facing towards the display. Insert the CF card into the CF card slot with the pinholes pointing towards the CF card slot opening. Insert the USB drive into the USB HOST slot as shown. Important: y Do not force the memory card in the memory slot. y The 3-in-1 card slot only reads one memory card at a time. Do not insert more than one card into the memory card slot.
Copy files from computer You can connect the digital photo frame to a computer to copy the files to the card inserted on the photo frame. Before connecting to computer, remove any connected USB drive from the frame. 1. 2. Connect the mini plug of the USB cable to the mini USB port on digital photo frame, and other end to the computer. The computer system detects “New hardware” and starts to install the driver automatically. Wait for the system to finish the installation.
Viewing Photos Main screen In the main screen, you can select connected source to view pictures or change the frame settings. 1. 2. Press the [MENU] button on the remote control to access the main screen. All connected sources and setup icons are displayed. USB driver Appears when you inserted a USB flash driver. SD/MMC Appears when you insert a SD or MMC card. MS Appears when you insert a MS card. CF Appears when you insert a CF card. SETUP To customize the settings of Digital Photo Frame.
Running a slideshow In any mode, press the [ ] button to start slideshow. y To pause the slideshow and view a single picture, press the [OK] button. To resume the slideshow, press the [OK] button again. y Press the [2] button to exit the slideshow and view the pictures in thumbnail. y Press the [MENU] button to exit the slideshow and return to the main screen. Viewing thumbnails The pictures on the selected memory source can be displayed on the screen as thumbnails.
Browsing a single picture You can select a single picture to display on the screen, without a slideshow. 1. Select a picture in the thumbnail view, and press the [OK] button. The selected picture is displayed on the full screen. y To view the previous or next photo, press the [S] or [T] or [ ] or [ ] button. y To rotate a picture, press the [W] or [X] button. y To magnify a picture up to 16X, press the [ ] button repeatedly.
Using OSD menu You also can use the OSD menu to manually view the photos one by one. 1. 2. Press the [OSD] button during viewing the picture or slideshow. The OSD menu appears on the screen and slideshow pauses. Press the [W] or [X] button to navigate between the icons on the OSD menu. y To start slide show from the current picture, highlight X and press the [OK] button. y To skip to previous picture, highlight y To skip to next picture, highlight and press the [OK] button.
Managing Files In the File mode, you can view all playable files and folders on the memory source. You also can copy files from a memory device to another memory device or delete the files. 1. Select a memory source (e.g. USB, SD/MMC) in the main screen and press the [OK] button. The mode menu appears. 2. Press the [W] or [X] button on the remote control to select File, and press the [OK] button. The file list appears. 3.
Coping files 1. Highlight a file using the [S] or [T] button and press the [X] button. A check mark ; is displayed next to the file. To check more files, repeat above step. 2. Press the [OSD] button. A menu with COPY and DELETE options is displayed on the right screen. 3. Use the [S] or [T] button to select COPY and press the [OK] button. The other 4. Use the [S] or [T] button to select a memory device and press the [X] button to 5. Press the [OK] button to start coping files.
Deleting files 1. Highlight a file using the [S] or [T] button and press the [X] button. A check mark ; is displayed next to the file. To check more files, repeat above step. 2. Press the [OSD] button. A menu with COPY and DELETE options is displayed on the right screen. 3. Use the [S] or [T] button to select DELETE and press the [OK] button. 4. Use the [W] or [X] button to select “ ;” or “:” to delete the file or exit without deleting.
Settings menus Setting options Description LANGUAGE Choose the on-screen language. SLIDESHOW TIME Specify how long each picture is displayed in a slide show. The available options include: 3s, 5s, 15s, 1 min, 15mins, 1 hour. Specify the transition effect between pictures in a slide show.
Frequently Asked Questions 1. Why cannot the Digital Photo Frame display some files from my Flash card or USB device? • Some unpopular memory cards are not compatible with the device. Use a card which matches with the Digital Photo Frame. • The file formats on your card or USB device might not be supported (only JPEG pictures are accessible). Provide files with the supported JPEG. 2. There is a memory card inserted in the Digital Photo Frame, but the device is not able to read the card.
4. Why does the screen not show anything? • The device might not have been turned ON or the adapter is not well connected. 5. Can I rotate a picture on the screen? • YES. Use the [W] or [X] button to rotate a picture. Note: The rotated picture will return to its original orientation after you power off the Digital Photo Frame. 6.
Technical Specification Digital TFT LCD Display Panel size: 7 inches Screen aspect ratio: 4:3 Resolution: 640*480 pixels I/O Remote control, DC in Power adaptor Input: 100~240V AC, 50/60Hz Output: 9V 1.5A DC USB port USB Host 2.0 & USB device 2.
Contact/Service If you have any questions on or need help with our products please do not hesitate to get in touch with our Technical Service. You can reach our service people by phone under the telephone number indicated below from Monday through Thursday from 9:00 am to 4:00 pm and on Friday from 9:00 am to 1:00 pm. Independently of these service times you can also get in touch by e-mail, fax or mail: JOBO AG Koelner Strasse 58 D-51645 Gummersbach Tel.
