Photo Display Instruction Manual PDJ120 / PDJ855 / PDJ152 / PDJ155 ��������������������������������������
1. Introduction Congratulations on your purchase of the JOBO Photo Display! Before operating the unit, please read this manual thoroughly and retain it for future reference. This manual will help you to learn many of the exciting and useful features of your new Photo Display and make viewing more enjoyable. The Photo Display lets you view digital pictures directly from your camera‘s memory cards. You will be able to create a slideshow using multiple transition effects or display one picture at a time.
2. Getting Started - Assemble the Photo Display stand on the back for propping stability, then plug the power adapter into an electrical outlet. - Push the power switch at the end of Photo Display to “ON”. ��� 1. ����� ��������� 2. 1. Inserting ��� Memory Cards 2. 3.
��������� ����� ������ ��� 2.2. Viewing Picture ����� ��������� 1. You can use either the remote control or the on-board buttons to control the Photo Display. 2. Remove the plastic battery insulator (if any) on the bottom of the remote control and make sure the remote control has a battery installed. See “Installing and replacing battery” section if you need a new battery. 3.
2.3. Installing and Replacing the Remote Control Battery 1. Place the Remote Control with the control buttons facing downward. 2. While pressing down on the ridged area of the battery cover pull the tray out. 3. Place a “CR2025” lithium battery on the tray with the positive “+” end facing toward you. 4. Close the tray. + 2.4. Display CLOCK&CALENDAR - Press [CLOCK] key on remote control into COLCK & CALENDAR interface, see following screen cut picture: Press [CLOCK] key again return to main menu.
PDJ120 • Display: 12.1 inch (30.7 cm) colour TFT LCD • Resolution: 800 x 600 pixels • Internal memory: 128 MB for up to 800 pictures with optimal screen resolution • Contrast ratio: 350:1 • Aspect ratio: 4:3 • Card slots for CF, SD, MMC, MS, MS Pro, xD • USB 2.
- Change of battery after the end of the warranty period - Change of hard disk after the end of the warranty period - Malfunctions due to incorrect operation by the user (if device is not used as described in the manual) - Malfunctions caused by other devices - Changes or damage to the device not caused by the manufacturer; especially, warranty claims will lapse if the device has been opened by anyone other than by a JOBO AG repair workshop - Damage caused by natural disasters (acts of God) A har