Operation Manual

20
Connect to a printer
Power adaptor
1. Press POWER button to turn on this
device.
2. Press to bring up the System
Setup menu under MAIN MENU.
Press or to select USB
Link to, then press or
(page 19).
3. Press or to select Printer,
then press .
4. Use the supplied mini-USB cable,
connect the mini USB connector
located on the back of the unit
and the other end to a PictBridge
compatible printer.
Note
• The print function only works
with printers that are PictBridge-
compatible.
• Be sure the USB Link to is setup to
Printer selection, otherwise the print
function will invalid.
Print a photo
1. Select a photo and display it in photo
browse mode (page 12).
2. Press to bring up the Settings
menu.
3. Use the / / / buttons,
select Print, then press .
4. A confirmation message appears.
Select Yes and press to
confirm. The photo will then be
printed from your printer.
Print this photo?
No Yes
Note: To change the print size, quality
and other settings, please refer
to your printer’s instruction
manual.
Direct printing