Operation Manual

21
When connecting to a PC, the photo
frame allows you to transfer music,
video and photo files between the
photo frame’s internal memory, a
memory card inserted and PC.
Power adaptor
1. Press POWER button to turn on this
device.
2. Press to bring up the System
Setup menu under MAIN MENU.
Press or to select USB
Link to, then press or
(page 19).
3. Press or to select PC,
then press .
4. Use the supplied USB cable to
connect the mini-USB connector
to the photo frame, and the regular
USB connector to an available USB
port on your Windows™ 2000 with
Service Pack 4 or higher, Windows™
XP with Service Pack 2 or higher,
Windows™ Vista PC/notebook.
Copy les from and to a PC
Warning: Do not connect a USB
device to the USB A-type connector
and the unit to PC via mini USB port
at the same time, it may cause conflict
and may not work properly. Please
restart the unit if happens.
ATTENTION: To get proper connection
with your PC and the unit, please stop
photo slideshow, music, video playback
or scan before connecting the unit to
PC.
5. It may take a few seconds for
Windows™ to recognize the photo
frame. When the photo frame is
recognized, 3 new removable
drives should appear in Windows
Explorer. One of these drives is
labeled PF-A6L, representing the
internal memory of the photo frame.
The other 2 drives are labeled
Removable Disk, representing CF
type I card and SD/MMC/MS/xD
card in sequential order.
Note: Drive letter assignment may vary
from PC to PC.
6. Use standard Windows Explorer file
copy and paste procedures to move
content onto the frame’s internal
memory or inserted memory card(s).