DATA SHEET For Connecting Six Pairs of Speakers to an Amplifier or Receiver, with Precise Volume Adjustment in any Zone SIX ZONE SPEAKER SELECTOR WITH VOLUME CONTROLS S-6VC
S-6VC SIX ZONE SPEAKER SELECTOR WITH VOLUME CONTROLS FEATURES • • • • • • • • Safely connect up to six speaker pairs to a single amplifier or receiver Individual room on/off switches 12 step make before break volume control switch design High power handling capability Built-in protection circuit Compatible with all 4 ohm capable amplifiers or receivers Non skid feet for unit stability Includes customized room labels INSTALLATION FRIENDLY DESIGN: • Accepts up to 10 gauge wire • Removable connector secures
PREPARING FOR INSTALLATION: The Speaker wires and Amplifier wires must reach the proposed location of the S-6VC speaker selector. Mark the cables with Wire labels, describing where the cables originate from, rather than where they will terminate. INSTALLATION: 1. Select an appropriate location for the S-6VC. 2. Run all the necessary wiring to the S-6VC. Label the wires for future reference. 3. Strip 1/4" of insulation from the end of each wire. Tightly twist the end of each wire until no frayed ends remain.