Instruction Manual

52
PICTURE 15
TURN OFF
Transfer the foodstuff inside your product to a convenient place.
Unplug your product. (Picture 15)
If your product will not be used for a long time, apply following considerations:
− Clean your product. Otherwise, the humidity on the wall may cause darkening of the
internal surface.
CAUTION!
If your product will be stored at an indoor place (mandatory), after shutdown:
Do not cover it with plastic sheets. Plastic will cause smell and sweating of your product
as it does not breathe. Corrosion may be seen as the result of sweating.
Smell formation may occur in cases where you fail to store your product with the door
open.
CLEANING, MAINTENANCE AND TRANSPORT
Cleaning of your device is composed of two stages, which are the internal cleaning and
external cleaning.
Following warnings must certainly be abided before start cleaning.
CAUTION!
Unplug your product before every cleaning.
Always wear protective gloves during cleaning and maintenance. This will protect you
from injuries.
Never use domestic cleaning agents, abrasive and scratching substances (surface
cleaners, detergent, flammable and sparkling, solvent like gasoline, thinner, acid) as
cleaning agents. Otherwise loosening may occur in the plastic parts of your product.
Never use flowing and pressurized water for cleaning.
INTERNAL CLEANING
Transfer the foodstuff inside your product to a convenient place.
Before the internal cleaning, wait until the temperatures of the internal parts of your
product reaches to the ambient temperature.
Always wear protective gloves during cleaning and maintenance. This will protect you