Datasheet

Specifications
Sample Rates supported:
44.1kHz, 48kHz, 88.2kHz & 96kHz
Digital i/o
Fully conformant with the ADAT Lightpipe standard
Analogue Inputs
levels: -10dB / +4dB switchable
Max input level: +22dBU = 0dBFS
A-D conversion: 24 bit, 96kHz
106dB S/N; 96dB THD+N (typical A-weighted 48kHz)
Analogue Outputs
levels: -10dB / +4dB switchable
Max output level: +22dBU = 0dBFS
D-A conversion: 24 bit / 96kHz
106dB S/N; 94dB THD+N (typical A-weighted 48kHz
Timecode Reader
Frame Rates: 24,25,29.97 drop and non-drop, 30 fps; Trigger only (no chase)
Physical
19" rack mountable - 1U high
Dimensions: 425mm x 150mm x 44.4mm
Weight: 2.1kg
dc input: 7.5V - 15V
Power consumption: <25W
Rear Panel Connectors
Analogue i/o
3 x 25 way Female D-type supplied with 3m looms to 1/4" stereo TRS jacks (for mixer
insert points - tip send, ring return)
(Loop through outputs)
8 x 1/4" stereo TRS jack sockets (Ch 17-24 only: tip send, ring return). Only available in
Analogue i/o mode.
Note: The BBR1-A is not supplied with lightpipe cables or analogue cable looms. JoeCo or
your local dealer will be able to supply you with the right cable looms for your installation.
Digital i/o
3 x TOSlink (Lightpipe) 8 channel input connectors
3 x TOSlink (Lightpipe) 8 channel output connectors
Monitoring
1 x 1/4" stereo TRS jack socket: Headphone output
Control and Synchronisation
1 x 1/4" TRS jack socket: Linear Time Code (LTC) Reader / Footswitch
1 x 5-pin DIN: MIDI Time code (MTC) and MIDI Machine Control (MMC)
1 x 9-pin Male D-type: SONY PII protocol
2 x RCA sockets: AES/SPDIF word clock reference input / communications to auxiliary
units
Other Connectors
1 x USB2 (480Mb/s) interface to disk drive
1 x mini DIN: PS2 keyboard socket
1 x 2.5mm dc inlet (9Vdc power) - power adapter supplied