Operator's Manual
Table Of Contents
- Introduction
- Safety
- Recognize Safety Information
- Understand Signal Words
- Follow Safety Instructions
- Practice Safe Maintenance
- Use Steps and Handholds Correctly
- Handle Electronic Components and Brackets Safely
- Use Electronic Display Properly
- Prevent Electrical Shock and Fires
- Avoid Exposure to High Radio Frequency Fields
- Avoid Electrical Power Lines
- Avoid Electrical Power Lines
- Safety Labels
- Regulatory and Compliance Information
- System Overview
- Component Overview
- Setting Up–Configuring RTK Radio 450
- Troubleshooting
- Specifications
- John Deere Service Literature Available
- John Deere Service Keeps You On The Job
PC18506—UN—25FEB14
RTK Conguration Page
A—Start Button
Once Absolute Base is congured, conduct a 24-hour
survey or manually enter base location information from
previous survey. Select Edit stored RTK Base Start
button (A).
Edit RTK Base Location – 24-Hour Survey
PC18508—UN—26FEB14
Edit RTK Base Location
A—RTK Base Location Start Button
Select Survey RTK Base Location Start button (A). Read
and follow steps in popup. Once survey is started, a 24-
hour countdown displays on RTK Conguration page.
Once survey is complete, record and store base location
survey results at a separate location for future reference.
Survey RTK Base Location
PC23752—UN—20FEB17
Survey RTK Base Location
A—Storage Location Drop-Down Menu
B—Start 24-Hour Survey Button
1. Select storage location (A).
2. Position StarFire™ Receiver.
3. Press start survey button (B).
4. Wait 24 hours (display can be disconnected).
5. Base station location automatically saves at end of
24-hour survey.
Edit RTK Base Location – Manual Entry
Ensure receiver is mounted in exact same position as
previous survey. Enter previously recorded 24-hour
survey results.
NOTE: Do not enter values other than locations
calculated using the 24-hour survey.
PC18507—UN—26FEB14
Edit RTK Base Location
A—Base Location Drop-Down Menu
StarFire is a trademark of Deere & Company
Setting Up–Conguring RTK Radio 450
60-3