Operator's Manual
Table Of Contents
- Introduction
- Safety
- Recognize Safety Information
- Understand Signal Words
- Follow Safety Instructions
- Practice Safe Maintenance
- Use Steps and Handholds Correctly
- Handle Electronic Components and Brackets Safely
- Use Electronic Display Properly
- Prevent Electrical Shock and Fires
- Avoid Exposure to High Radio Frequency Fields
- Avoid Electrical Power Lines
- Avoid Electrical Power Lines
- Safety Labels
- Regulatory and Compliance Information
- System Overview
- Component Overview
- Setting Up–Configuring RTK Radio 450
- Troubleshooting
- Specifications
- John Deere Service Literature Available
- John Deere Service Keeps You On The Job
View RTK Readings
To view RTK readings:
PC18516—UN—26FEB14
Diagnostics Softkey
1. Select Diagnostics softkey.
PC18522—UN—03MAR14
StarFire™ Diagnostics – Readings
A—Readings Tab
B—Readings Drop-Down Menu
2. Select Reading tab (A).
3. Select RTK from drop-down menu (B).
The following RTK readings are displayed:
● RTK Software Version No.
● RTK Serial Number
● RTK Status
● RTK Search Time (seconds)
● RTK Satellites in Search (above 10° elevation)
● Frequency Range (MHz)
● Repeaters in Network
● SF2 Fallback Days Remaining
● SF2 Fallback Status
● Transmission Power (Radio Only)
HC94949,0000B16-19-06MAR17
Radio Self Test
Results of last performed test are displayed on Radio
Self Test page. Run Radio Self Test to display current
values.
PC18516—UN—26FEB14
Diagnostics Softkey
1. Select Diagnostics softkey.
PC18517—UN—26FEB14
StarFire Diagnostics – Radio Self Test Tab
A—Radio Self Test Tab
B—Radio Self Test Start Button
2. Select Radio Self Test tab (A).
3. Select Radio Self Test Start button (B).
Troubleshooting
80-1