-m 30-200 60, 90 AND 125 SKID-STEER LOADERS 60 Skid-Steer Loader with utility bucket CSM286 C'SM287 90 Skid-Steer Loader with light material bucket CSM7Z4 125 Sk/d-St8er Loader with dirt and foundry bucket and teeth Aug. 64 litho in U.S.A.
~, 30-200-2 60,90 and 125 Skid-Steer CI Loaders PRODUCT PROFILE LARGE OPERATING CAPACITIES Model 60-600 lb. Model 90-700 lb. Model 125 Gas-1325 lb. Model 125 Diesel-141O lb. Good productivity, ROPS ROLL-GARD - STANDARD Comes with canopy, side screens and built-in lift arm lock. - Operator Safety. '\ / / / --- / / """, - _/ , .?""- /:;.c:; -- II J I \ ~ \ \ \ '\ COMPACT DESIGN Narrow width and short overall length allows working in tight areas.
a 60, 90 and 125 Skid-Steer 30-200-3 Loaders PRODUCT FEATURES Compact and Maneuverable John Deere skid-steer loaders are compact in design for greater maneuverability in tight, close-quarter areas. They will operate in areas in which the conventional, tractormounted loaders are too large to fit. Narrow and able to turn within their own radiuses, these machines are fully at home inside calf pens, milking barns and poultry houses.
60, 90, and 125 Skid-Steer 30-200-4 D Loaders Hydrostatic Drive Operation60 and 90 Loaders-Continued 0 0 PUMP FILTER ~ CSM949 (60 Skid-Steer Loader shown) Each pump is connected by hose routing to a hydrostatic gear motor. Hydraulic fluid is drawn by the pumps from the reservoirthrough a filter. The pumps then deliver the pressurized fluid to the motors. The motors and chains of the 60 Skid-Steer Loader are located under the floor panel, in the 18-U.s.
D 60, 90, and 125 Skid-Steer Hydrostatic Drive Operation-125 Loader ,~~ MDUNTING PLATE (-'- - /£1/ '\ ENGINE FLYWHEEL HOUSING CSM951 &~ C7T\I---~~' ----"-:"" -- --- -- I _~I -- I -../;--~ ' y" ,: , 'I . -;', ", ,;', :,' " '" \" --'I , c..:-:: \ II ,I PUMP (\ "'" ~ \\ -..-) - ,~ z.'>"'-----~-- "'-'::-: ,<1- , --::::: " \ \ I \ ' \ \ \ \ \\\ ~-,--""::::...~~ \ \ -- "; \ ~ II,' "I "' 2\ ,. '.."~I,.?\'! I, I__~__~ 'I" \ 1.---,.. " .. \t \\~---~ " .
30-200-6 60, 90, and 125 Skid-Steer D Loaders lift Capacity Although these machines are compact and able to work in confined areas, they have large lift capacities. The operating capacities are: 600 pounds for the 60 Loader; 700 pounds for the 90 Loader; a big, 1325 pounds for the 125 Gas; and 1410 pounds for the 125 Diesel. Operating Capacity, sometimes referred to as rated lift capacity, is the safe load the loader can realistically handle while operating.
D 60, 90, and 125 Skid-Steer 30-200-7 PLASTIC FUEL LINERS Easy Servicing-Continued (90 Skid-Steer Loaders Loader shown) The motors are under the floor panel on the Model 90. The reservoir is located in the crossbeam between the boom tower and in the boom towers. A convenient fill tube is located on top of the crossbeam with a visible sight gauge showing when the reservoir is full or when additional fluid is needed.
30-200-8 60, 90, and 125 Skid-Steer a Loaders SPECIFICATIONS (Specifications and design subject to change without notice) 90 (SN155,001- 60 (SN120,001- ENGINE: Make and model. . . . . . . . Fuel. . . .. . Cooling System. . . . . . . . . Cylinders Displacement. .. . . . . . . ,.. Horsepower (Net) . . . . . .. ) 125 DIESEL (SN120,O01- Continental Y112 Gasoline (unleaded) Liquid 4 112 cu. in. (1836 cm3) 3.19 in. (81.0 mm) 3.50 in. (89.0 mm) 37 @ 2800 rpm 3000 90 ft-Ibs (122 N'm) @ 1500 rpm 6.
1:1 60, 90, 125 Skid-Steer Loaders 30-200-9 SPECIFICATIONS-Continued 90 60 (SN120;o01- 125 GAS (S- (SN1SS;oo1- Operational Specifications (with Utility Bucket): 700 lb. (318 kg) Operating Capacity. . . . . . 600 lb. (272 kg) 1400 lb. (635 kg) Tipping Load. . . . . . . . . .. 1200 lb. (544 kg) Weight Distribution Front 20% 32% Rear 80% 68% Cycle Times with Empty Bucket, In Seconds (Approx.) Boom Raising. . . . . . . . . . . 5.67 5.0 Boom Lowering. . . . . . . . . 3.78 3.0 Bucket Dumping. . . . . . .
30-200-10 60, 90 and 125 Skid-Steer a Loaders DIMENSIONS /\ M \~ h.\_1~,.~.. """"t=,.=,,-\ { \ - -'--:-d~~-'-~ t / I ~.i;Y ~\ 3 '. '~.\ G . '\. . / .' F -r J..- I -t 0 0 Vo ~ >:"'O t~-~ '" .\ .. ~ ~t~l"'-'--~lo '-I l i-p ' R 1_0- , CSMJO5 T CSMJO4 II Specifications are in accordance with IEMC standards. Dimensions and foundry bucket (125). A - Overall Height-Lift Raised.. Arms . .. .. .. .. .. .. .. . B - Height to Hinge Pin (max.) ......
II 60, 90 and 125 Skid-Steer 30-200-11 Loader EQUIPMENT FOR BASE MACHINE 60 Kohler 17-hpair-cooledengine ,..................... Onan 23-hpair-cooled engine .............................. Continental 37-hp liquid-cooled engine (or) . . . . . . . . . . . . . . . . . . Isuzu40-hpliquid-cooledengine............................ Four-wheeldrive.......................................... Hydrostatic drive ......................................... T-barcontrol.............................................