Use and Care Manual

GXAL42001—UN—04MAR13
D105 shown
9. For automatic transmission machines, secure rear of machine at
both sides of the axle at points (C) to trailer with heavy-duty straps,
chains, or cables. Straps must be directed down and outward from
machine.
10. Secure hood to prevent from lifting while driving.
Using Weights
CAUTION: The machine may become unstable when
operating on slopes and/or with some attachments.
Use weights to improve stability when operating on slopes
or using attachments.
Remove weights when not required.
IMPORTANT: Never use liquid in tires or wheel weights as ballast.
Transmission damage can occur.
When rear ballast is needed, use only the approved rear
weight bracket and attaching weights.
NOTE: See your authorized dealer for recommended weights.
• Install front weights for added stability and steering control when you
use equipment such as the rear-mounted grass bagger.
• Install rear weights when using the snow blade or snowblower.
• Remove weights when not required.
Using Tire Chains
IMPORTANT: Do not use chains with mower deck or tiller.
Tire chains are recommended for use with most front attachments.
Remove tire chains before installing mower deck.
See your attachment Operator’s Manual for tire chain recommendation.
See your authorized dealer for the chains.
Using Accessories
PY19031—UN—07AUG13
Using the Power Port (If Equipped)
CAUTION: Safe operation requires your full attention. Do not
wear radio or music headphones while operating machine.
An electric power port (A) can be used for accessories. See your
authorized dealer.
Using CargO Mount System™
The front and rear CargO Mount System™ brackets (B) can be used for
easy attachment of selected optional equipment.
Use John Deere approved optional equipment only. See your
Authorized Service Center for approved optional equipment.
Choosing Mower Blades
Three types of mower blades are available for use with D series
mowers.
• 3-N-1 blades. These are general purpose blades that are best suited
for side-discharge operation, but can be used with a bagger
attachment, or with a mulch cover installed. They are not designed
for optimal performance when bagging or mulching.
• Bagger blades. These blades are designed for optimal performance
when used with bagger attachments.
• Mulching blades. These blades are designed for optimal
performance when used with a mulch cover installed.
Mowing Tips
The following recommendations will produce the best lawn cut quality
and appearance:
• Keep mower blades sharp. Dull blades will tear grass; tips of grass
will then turn brown.
• Cutting grass too short may kill grass and let weeds grow easily. The
suggested nished cut height should be within specied height
range.
Specication
Finished Cut Height Range — Height . . . . . . . . . . . . . . . . . 1.75 - 2.75 in. (44 - 70 mm)
Operating
32