Use and Care Manual
GXAL42032—UN—04MAR13
• On 107 cm (42 in.) mower deck: Make sure belt is routed
through both belt guides (J).
10. Remove wood blocks from both sides of mower deck.
11. On machines with 107 cm (42 in.) mower deck: Attach mower
engagement drive cable.
GXAL42033—UN—04MAR13
107 cm (42 in.) mower deck only
a. Route cable under mower belt and brake rod and attach cable
spring (K) to idler sheave bracket (L).
b. Pull out on cable (M), align black end of cable with slot in
bracket (N) and release cable into slot. Secure with spring
locking pin (O).
12. Level mower deck.
Replacing Mower Drive Belt (107 cm (42 in.)
Mower Deck)
1. Park machine safely. (See Parking Safely in the SAFETY section.)
2. Remove mower deck.
GXAL42034—UN—04MAR13
3. Remove drive belt:
a. Remove three capscrews and belt shield (A).
b. Remove two capscrews and belt shield (B).
c. Loosen sheaves (C).
d. Remove mower belt.
4. Inspect belt for wear or damage; replace as necessary.
5. Clean top surface of mower deck and sheaves.
6. Install belt on mower deck as shown. Make sure belt is in the
groove of each sheave.
7. Tighten sheaves to specications.
Specication
Mower Deck Drive Sheave Nuts (107 cm (42 in.) Mower Deck)
— Torque . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 lb-ft (47 N·m)
8. Install belt shields.
9. Install mower deck.
10. Adjust mower belt tension and spindle brakes, if necessary.
Replacing Mower Drive Belt (122 cm (48 in. )
and 137 cm (54 in.) Mower Decks)
1. Park machine safely. (See Parking Safely in SAFETY section.)
2. Remove mower deck.
GXAL42035—UN—04MAR13
122 cm (48 in.) mower deck shown
3. Remove ve capscrews and left and right belt shields (A).
Service Mower
42