SDS

SAFETY DATA SHEET
According to OSHA Hazard Communication Standard, 29 CFR
1910.1200
Version 1.3 Revision Date: 08/27/2015 Print Date: 08/28/2015
4 / 15 800001028894
US
Additional advice : For guidance on selection of personal protective equipment
see Chapter 8 of this Safety Data Sheet.
For guidance on disposal of spilled material see Chapter 13 of
this Safety Data Sheet.
SECTION 7. HANDLING AND STORAGE
Technical measures : Use local exhaust ventilation if there is risk of inhalation of
vapours, mists or aerosols.
Use the information in this data sheet as input to a risk as-
sessment of local circumstances to help determine appropri-
ate controls for safe handling, storage and disposal of this
material.
Precautions for safe handling : Avoid prolonged or repeated contact with skin.
Avoid inhaling vapour and/or mists.
When handling product in drums, safety footwear should be
worn and proper handling equipment should be used.
Properly dispose of any contaminated rags or cleaning mate-
rials in order to prevent fires.
Avoidance of contact : Strong oxidising agents.
Product Transfer : This material has the potential to be a static accumulator.
Proper grounding and bonding procedures should be used
during all bulk transfer operations.
Storage
Other data : Keep container tightly closed and in a cool, well-ventilated
place.
Use properly labeled and closable containers.
Store at ambient temperature.
Packaging material : Suitable material: For containers or container linings, use mild
steel or high density polyethylene.
Unsuitable material: PVC.
Container Advice : Polyethylene containers should not be exposed to high tem-
peratures because of possible risk of distortion.
SECTION 8. EXPOSURE CONTROLS AND PERSONAL PROTECTION
Components with workplace control parameters
Components CAS-No. Value type
(Form of
exposure)
Control parame-
ters / Permissible
concentration
Basis
Oil mist, mineral Not Assigned TWA ((inhal-
able frac-
tion))
5 mg/m3 US. ACGIH
Threshold
Limit Values
(Mist) 5 mg/m3 OSHA_TRA