SAFETY DATA SHEET According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Version 1.3 Revision Date: 08/27/2015 Print Date: 08/28/2015 SECTION 1. IDENTIFICATION Product name : FormulaShell SAE 10W-30 Motor Oil Product code : 001D7227 Manufacturer or supplier's details Manufacturer/Supplier : Shell Oil Products US P.O.
SAFETY DATA SHEET According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Version 1.3 Revision Date: 08/27/2015 Print Date: 08/28/2015 Used oil may contain harmful impurities. Not classified as flammable but will burn. The classification of this material is based on OSHA HCS 2012 criteria. Under normal conditions of use or in a foreseeable emergency, this product does not meet the definition of a hazardous chemical when evaluated according to the OSHA Hazard Communication Standard, 29 CFR 1910.
SAFETY DATA SHEET According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Version 1.3 Revision Date: 08/27/2015 Print Date: 08/28/2015 Protection of first-aiders : When administering first aid, ensure that you are wearing the appropriate personal protective equipment according to the incident, injury and surroundings. Immediate medical attention, special treatment : Treat symptomatically. SECTION 5. FIRE-FIGHTING MEASURES Suitable extinguishing media : Foam, water spray or fog.
SAFETY DATA SHEET According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Version 1.3 Additional advice Revision Date: 08/27/2015 Print Date: 08/28/2015 : For guidance on selection of personal protective equipment see Chapter 8 of this Safety Data Sheet. For guidance on disposal of spilled material see Chapter 13 of this Safety Data Sheet. SECTION 7. HANDLING AND STORAGE Technical measures : Use local exhaust ventilation if there is risk of inhalation of vapours, mists or aerosols.
SAFETY DATA SHEET According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Version 1.3 Revision Date: 08/27/2015 Print Date: 08/28/2015 NS Biological occupational exposure limits No biological limit allocated. Monitoring Methods Monitoring of the concentration of substances in the breathing zone of workers or in the general workplace may be required to confirm compliance with an OEL and adequacy of exposure controls. For some substances biological monitoring may also be appropriate.
SAFETY DATA SHEET According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Version 1.3 Revision Date: 08/27/2015 Print Date: 08/28/2015 tions should be taken to avoid breathing of material. If engineering controls do not maintain airborne concentrations to a level which is adequate to protect worker health, select respiratory protection equipment suitable for the specific conditions of use and meeting relevant legislation. Check with respiratory protective equipment suppliers.
SAFETY DATA SHEET According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Version 1.3 Revision Date: 08/27/2015 Print Date: 08/28/2015 must be observed for the discharge of exhaust air containing vapour. SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance : Liquid at room temperature.
SAFETY DATA SHEET According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Version 1.3 Revision Date: 08/27/2015 Viscosity, dynamic : Data not available Viscosity, kinematic : 69.05 mm2/s (40.0 °C / 104.0 °F) Method: Unspecified Print Date: 08/28/2015 10.42 mm2/s (100 °C / 212 °F) Method: Unspecified Conductivity : This material is not expected to be a static accumulator. Decomposition temperature : Data not available SECTION 10.
SAFETY DATA SHEET According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Version 1.3 Revision Date: 08/27/2015 Print Date: 08/28/2015 Skin corrosion/irritation Product: Remarks: Expected to be slightly irritating., Prolonged or repeated skin contact without proper cleaning can clog the pores of the skin resulting in disorders such as oil acne/folliculitis. Serious eye damage/eye irritation Product: Remarks: Expected to be slightly irritating.
SAFETY DATA SHEET According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Version 1.3 Revision Date: 08/27/2015 Print Date: 08/28/2015 a developmental toxicant. STOT - single exposure Product: Remarks: Not expected to be a hazard. STOT - repeated exposure Product: Remarks: Not expected to be a hazard. Aspiration toxicity Product: Not considered an aspiration hazard. Further information Product: Remarks: Used oils may contain harmful impurities that have accumulated during use.
SAFETY DATA SHEET According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Version 1.
SAFETY DATA SHEET According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Version 1.3 Revision Date: 08/27/2015 Print Date: 08/28/2015 SECTION 13. DISPOSAL CONSIDERATIONS Disposal methods Waste from residues : Waste product should not be allowed to contaminate soil or ground water, or be disposed of into the environment. Waste, spills or used product is dangerous waste. Disposal should be in accordance with applicable regional, national, and local laws and regulations.
SAFETY DATA SHEET According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Version 1.3 Revision Date: 08/27/2015 Print Date: 08/28/2015 EPCRA - Emergency Planning and Community Right-to-Know Act CERCLA Reportable Quantity This material does not contain any components with a CERCLA RQ., Shell classifies this material as an "oil" under the CERCLA Petroleum Exclusion, therefore releases to the environment are not reportable under CERCLA.
SAFETY DATA SHEET According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Version 1.
SAFETY DATA SHEET According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Version 1.3 Revision Date: 08/27/2015 Print Date: 08/28/2015 This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental requirements only. It should not therefore be construed as guaranteeing any specific property of the product.
SAFETY DATA SHEET LEAD ACID BATTERY WET, FILLED WITH ACID SECTION 1: PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: OTHER PRODUCT NAMES: Lead Acid Battery Wet, Filled With Acid Electric Storage Battery, UN2794 MANUFACTURER: ADDRESS: East Penn Manufacturing Company, Inc.
SAFETY DATA SHEET LEAD ACID BATTERY WET, FILLED WITH ACID Hazard Statements Health Harmful if swallowed, inhaled, or in contact with skin. Causes severe skin burns and eye damage. Causes serious eye damage. May damage fertility or the unborn child if ingested or inhaled. May cause cancer if ingested or inhaled. Causes damage to central nervous system, blood and kidneys through prolonged or repeated exposure if ingested or inhaled. May cause harm to breast-fed children.
SAFETY DATA SHEET LEAD ACID BATTERY WET, FILLED WITH ACID Polypropylene 9003-07-0 5-10 (average: 8) NA NA – Not applicable/ND – Not determined Additional Information These ingredients reflect components of the finished product related to performance of the product as distributed into commerce. Inorganic lead, lead compounds and electrolyte (sulfuric acid) are the primary components. Other metals (ie. Sn, Cu, As) may be present at concentrations below the applicable reporting threshold.
SAFETY DATA SHEET LEAD ACID BATTERY WET, FILLED WITH ACID carefully and avoid tipping, which may allow electrolyte leakage. There may be increasing risk of electric shock from strings of connected batteries. Keep containers tightly closed when not in use. If battery case is broken, avoid contact with internal components. Keep vent caps on and cover terminals to prevent short circuits. Place cardboard between layers of stacked automotive batteries to avoid damage and short circuits.
SAFETY DATA SHEET LEAD ACID BATTERY WET, FILLED WITH ACID Additional Information Batteries are housed in polypropylene cases which are regulated as total dust or respirable dust only when they are 3 3 ground up during recycling. The OSHA PEL for dust is 15 mg/m as total dust or 5 mg/m as respirable dust. May be required to meet Domestic Requirements for a Specific Destination(s).
SAFETY DATA SHEET LEAD ACID BATTERY WET, FILLED WITH ACID Elemental Lead: Acute Toxicity Point Estimate =4500 ppm V (based on lead bullion) Elemental Arsenic: No data Oral LD50: Electrolyte: rat 2140 mg/kg Elemental Lead: Acute Toxicity Estimate (ATE) = 500mg/kg body weight (based on lead bullion) Elemental Arsenic: LD50 mouse: 145 mg/kg Elemental Antimony: LD50 rat: 100 mg/kg Routes of Entry: Sulfuric Acid: Harmful by all routes of entry.
SAFETY DATA SHEET LEAD ACID BATTERY WET, FILLED WITH ACID SECTION 12: ECOLOGICAL INFORMATION Environmental Fate: Lead is very persistent in soil and sediments. No data on environmental degradation. Mobility of metallic lead between ecological compartments is slow. Bioaccumulation of lead occurs in aquatic and terrestrial animals and plants but little bioaccumulation occurs through the food chain. Most studies include lead compounds and not elemental lead.
SAFETY DATA SHEET LEAD ACID BATTERY WET, FILLED WITH ACID Additional Information Transport requires proper packaging and paperwork, including the Nature and Quantity of goods, per applicable origin/destination/customs points as-shipped. SECTION 15: REGULATORY INFORMATION INVENTORY STATUS: All components are listed on the TSCA; EINECS/ELINCS; and DSL, unless noted otherwise below. U.S.
SAFETY DATA SHEET LEAD ACID BATTERY WET, FILLED WITH ACID See 40 CFR Part 370 for more details. Additional Information This product may be subject to Restriction of Hazardous Substances (RoHS) regulations in Europe and China, or may be regulated under additional regulations and laws not identified above, such as for uses other than described or asdesigned/as-intended by the manufacturer, or for distribution into specific domestic destinations.