SDS
SAFETY DATA SHEET
According to OSHA Hazard Communication Standard, 29 CFR
1910.1200
Version 1.3 Revision Date: 08/27/2015 Print Date: 08/28/2015
3 / 15 800001028894
US
Protection of first-aiders
: When administering first aid, ensure that you are wearing the
appropriate personal protective equipment according to the
incident, injury and surroundings.
Immediate medical attention,
special treatment
: Treat symptomatically.
SECTION 5. FIRE-FIGHTING MEASURES
Suitable extinguishing media
: Foam, water spray or fog. Dry chemical powder, carbon dio-
xide, sand or earth may be used for small fires only.
Unsuitable extinguishing
media
: Do not use water in a jet.
Specific hazards during fire-
fighting
: Hazardous combustion products may include:
A complex mixture of airborne solid and liquid particulates and
gases (smoke).
Carbon monoxide may be evolved if incomplete combustion
occurs.
Unidentified organic and inorganic compounds.
Specific extinguishing me-
thods
: Use extinguishing measures that are appropriate to local cir-
cumstances and the surrounding environment.
Special protective equipment
for firefighters
: Proper protective equipment including chemical resistant
gloves are to be worn; chemical resistant suit is indicated if
large contact with spilled product is expected. Self-Contained
Breathing Apparatus must be worn when approaching a fire in
a confined space. Select fire fighter's clothing approved to
relevant Standards (e.g. Europe: EN469).
SECTION 6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protec-
tive equipment and emer-
gency procedures
: Avoid contact with skin and eyes.
Environmental precautions
: Use appropriate containment to avoid environmental contami-
nation. Prevent from spreading or entering drains, ditches or
rivers by using sand, earth, or other appropriate barriers.
Local authorities should be advised if significant spillages
cannot be contained.
Methods and materials for
containment and cleaning up
: Slippery when spilt. Avoid accidents, clean up immediately.
Prevent from spreading by making a barrier with sand, earth
or other containment material.
Reclaim liquid directly or in an absorbent.
Soak up residue with an absorbent such as clay, sand or other
suitable material and dispose of properly.