Operating Guide
Table Of Contents
- Introduction
- Contents
- Product Identification
- Safety Labels with Text
- Safety Labels without Text
- Safety Label Location
- Understanding the Machine Safety Labels without Text
- Read Operator’s Manual
- Keep Children Away from Mower
- Avoid Serious Injury or Death from Tipping
- Avoid Injury from Getting Caught in Belts
- Avoid Injury from Equipment Fires
- Avoid Injury from Rotating Blades
- Avoid Injury from Hot Surfaces
- Avoid Injury from Rotating Blades and Thrown Objects
- Safety
- Machine Cleanout
- Operating Controls
- Operating
- Daily Operating Checklist
- Adjusting Seat
- Adjusting Cutting Height
- Checking and Adjusting Mower Deck Level
- Adjusting Mower Deck Wheels
- Testing Safety Systems
- Testing Park Brake Switch
- Testing Park Brake
- Testing Attachment Engagement Switch or Lever
- Testing Seat Switch
- Testing Reverse Implement Option (RIO)
- Using the Park Brake
- Checking Fuel Level (If Equipped)
- Using Hourmeter and MowerPlus™ Fuel Gauge (If Equipped)
- Using Key Switch and Headlights
- Starting the Engine
- Idling the Engine
- Stopping the Engine
- Using Travel Controls on Hydrostatic Transmission
- Using The Reverse Implement Option (RIO)
- Using Cruise Control (If Equipped)
- Engaging and Disengaging Mower
- Using Wash Port to Clean Mower Deck
- Unplugging Mower, Bagger, or Material Collection System
- Moving Machine by Hand
- Transporting Machine on Trailer
- Transporting Material Collection System (If Equipped)
- Using Weights
- Using Tire Chains
- Using Accessories
- Choosing Mower Blades
- Mowing Tips
- Towing Loads
- Service Intervals
- Service Lubrication
- Service Engine
- Emissions Service Information
- Avoid Fumes
- Engine Oil
- Checking Engine Oil Level
- Changing John Deere Easy Change™ 30-Second Oil Change System (If Equipped)
- Changing Engine Oil and Filter on models not equipped with the John Deere Easy Change™ 30-Second Oil Change System
- Cleaning Air Intake Screen and Engine Fins
- Checking and Cleaning Air Cleaner Elements (S100 and S110)
- Checking and Cleaning Air Cleaner Elements (S120, S130, and S140)
- Checking and Cleaning Air Cleaner Elements (S160, S170, and S180)
- Checking and Cleaning Emission Filter (If Equipped)
- Checking Spark Plug
- Replacing Fuel Filter
- Spark Arrestor Maintenance (If Equipped)
- Service Transmission
- Service Mower
- Removing or Installing Mower Drive Belt at Engine Drive Sheave (42 in, 48 in, and 54 in Mower Deck)
- Removing Mower Deck (42 in Mower Deck)
- Removing Mower Deck (48 in and 54 in Mower Decks)
- Installing Mower Deck (42 in Mower Deck)
- Installing Mower Deck (48 in and 54 in Mower Decks)
- Replacing Mower Drive Belt (42 in Mower Deck)
- Replacing Mower Drive Belt (48 in and 54 in Mower Decks)
- Checking for Bent Mower Blades
- Servicing Mower Blades
- Sharpening Blades
- Balancing Blades
- Service Electrical
- Service Miscellaneous
- Using Proper Fuel and Stabilizer
- Filling Fuel Tank
- Lifting Machine
- Checking Tire Pressure
- Removing and Installing Hood
- Cleaning Plastic Surfaces
- Cleaning and Repairing Metal Surfaces
- Avoid Damage to Plastic and Painted Surfaces
- Removing and Installing Front Wheel Assembly
- Removing and Installing Rear Wheel Assembly
- Troubleshooting
- Storage
- Specifications
- Warranty
- John Deere Quality Statement
- Service Record
- Slope Gauge
- Index
● Drive slowly so you do not have to stop while on a slope.
● Do not mow on wet grass. Tires can slip on wet grass even if the
brakes are working normally.
● Keep all movement on slopes slow and gradual. Do not make
sudden changes in speed or direction, which can cause the ride-on
mower to roll over.
● If the tires lose traction, disengage the PTO and proceed slowly and
carefully o the slope.
● Do not shift to neutral and coast downhill.
Identify Safe Slopes
● Before using your machine, measure slopes of all mowing areas to
determine which slopes are safe for mowing with a ride-on mower.
Use good judgment and common sense when performing this
survey.
Measuring Slopes
● Suggested method 1: Lay a straight piece of sturdy lumber 1.2 m (4
ft) long on the slope and measure the angle with an angle gauge or
protractor level.
● Suggested method 2: Refer to the slope gauge provided at the end
of the manual.
Slope Limits
● Exceeding the recommended maximum slope angle increases the
risk of rollover accidents that can result in serious injury or death.
GX100108—UN—14FEB20
● Never mow or operate this ride-on mower on slope angles greater
than 13° with ride-on mower in its basic conguration. The basic
conguration is the ride-on mower with a mower deck and no other
attachments. (A 13° slope is a slope that rises 1.4 m [4.6 ft] over a
horizontal distance of 6.1 m [20 ft].)
GX100111—UN—19FEB20
● Attachments such as material collection systems, weather
enclosures, or other attachments increase the risk of a rollover.
When using attachments, never mow or operate this ride-on mower
on slope angles greater than 10°. (A 10° slope is a slope that rises 1
m [3.5 ft] over a horizontal distance of 6.1 m [20 ft].)
● The risk of rollover is low on slopes of 10° or less. As the slope
angle increases to the recommended maximum, the risk increases
to a medium level.
Operating Near Terrain Hazards
GX100106—UN—01FEB20
● Terrain hazards such as ditches and drop os are a factor related to
loss-of-control and tip-over accidents, which can result in serious
injury or death. Use caution and common sense when operating
near terrain hazards.
● Do not mow or operate the machine in areas adjacent to hazards
that can cause the machine to roll over. If a wheel goes over an
Safety
12