Operating Guide
Table Of Contents
- Introduction
- Contents
- Product Identification
- Safety Labels with Text
- Safety Labels without Text
- Safety Label Location
- Understanding the Machine Safety Labels without Text
- Read Operator’s Manual
- Keep Children Away from Mower
- Avoid Serious Injury or Death from Tipping
- Avoid Injury from Getting Caught in Belts
- Avoid Injury from Equipment Fires
- Avoid Injury from Rotating Blades
- Avoid Injury from Hot Surfaces
- Avoid Injury from Rotating Blades and Thrown Objects
- Safety
- Machine Cleanout
- Operating Controls
- Operating
- Daily Operating Checklist
- Adjusting Seat
- Adjusting Cutting Height
- Checking and Adjusting Mower Deck Level
- Adjusting Mower Deck Wheels
- Testing Safety Systems
- Testing Park Brake Switch
- Testing Park Brake
- Testing Attachment Engagement Switch or Lever
- Testing Seat Switch
- Testing Reverse Implement Option (RIO)
- Using the Park Brake
- Checking Fuel Level (If Equipped)
- Using Hourmeter and MowerPlus™ Fuel Gauge (If Equipped)
- Using Key Switch and Headlights
- Starting the Engine
- Idling the Engine
- Stopping the Engine
- Using Travel Controls on Hydrostatic Transmission
- Using The Reverse Implement Option (RIO)
- Using Cruise Control (If Equipped)
- Engaging and Disengaging Mower
- Using Wash Port to Clean Mower Deck
- Unplugging Mower, Bagger, or Material Collection System
- Moving Machine by Hand
- Transporting Machine on Trailer
- Transporting Material Collection System (If Equipped)
- Using Weights
- Using Tire Chains
- Using Accessories
- Choosing Mower Blades
- Mowing Tips
- Towing Loads
- Service Intervals
- Service Lubrication
- Service Engine
- Emissions Service Information
- Avoid Fumes
- Engine Oil
- Checking Engine Oil Level
- Changing John Deere Easy Change™ 30-Second Oil Change System (If Equipped)
- Changing Engine Oil and Filter on models not equipped with the John Deere Easy Change™ 30-Second Oil Change System
- Cleaning Air Intake Screen and Engine Fins
- Checking and Cleaning Air Cleaner Elements (S100 and S110)
- Checking and Cleaning Air Cleaner Elements (S120, S130, and S140)
- Checking and Cleaning Air Cleaner Elements (S160, S170, and S180)
- Checking and Cleaning Emission Filter (If Equipped)
- Checking Spark Plug
- Replacing Fuel Filter
- Spark Arrestor Maintenance (If Equipped)
- Service Transmission
- Service Mower
- Removing or Installing Mower Drive Belt at Engine Drive Sheave (42 in, 48 in, and 54 in Mower Deck)
- Removing Mower Deck (42 in Mower Deck)
- Removing Mower Deck (48 in and 54 in Mower Decks)
- Installing Mower Deck (42 in Mower Deck)
- Installing Mower Deck (48 in and 54 in Mower Decks)
- Replacing Mower Drive Belt (42 in Mower Deck)
- Replacing Mower Drive Belt (48 in and 54 in Mower Decks)
- Checking for Bent Mower Blades
- Servicing Mower Blades
- Sharpening Blades
- Balancing Blades
- Service Electrical
- Service Miscellaneous
- Using Proper Fuel and Stabilizer
- Filling Fuel Tank
- Lifting Machine
- Checking Tire Pressure
- Removing and Installing Hood
- Cleaning Plastic Surfaces
- Cleaning and Repairing Metal Surfaces
- Avoid Damage to Plastic and Painted Surfaces
- Removing and Installing Front Wheel Assembly
- Removing and Installing Rear Wheel Assembly
- Troubleshooting
- Storage
- Specifications
- Warranty
- John Deere Quality Statement
- Service Record
- Slope Gauge
- Index
● Do not smoke or have open ame near battery.
● Wear eye protection and gloves.
● Do not allow direct metal contact across battery posts.
● Remove negative cable rst when disconnecting.
● Install negative cable last when connecting.
MP47322,00F466F-19-13JAN15
Removing and Installing the Battery
Removing
1. Park machine safely and lift hood. (See Parking Safely in the Safety
Section.)
APY36177—UN—10JUL20
2. Disconnect negative (-) battery cable (A).
3. Push red cover (B) away from positive (+) battery terminal and
remove cable (C) from battery.
4. Remove the battery strap (D) from C type clip (E) on the front left
side of the battery tray.
5. Remove battery.
Installing
1. Place battery into battery tray.
APY36178—UN—27JUL20
2. Insert the battery strap (A) into the clip (B) between the beads on
the strap.
3. Connect positive (+) cable (C) to positive (+) battery terminal rst,
then negative (-) cable (D) to negative (-) battery terminal.
4. Apply spray lubricant to terminal to help prevent corrosion.
5. Slide red cover over positive battery terminal.
MG39705,00004B3-19-03JUL20
Cleaning Battery and Terminals
1. Park machine safely. (See Parking Safely in the SAFETY section.)
2. Disconnect and remove battery.
3. Wash battery with solution of four tablespoons of baking soda to
one gallon of water. Be careful not to get the soda solution into the
cells.
4. Rinse the battery with plain water and dry.
5. Clean terminals and battery cable ends with wire brush until bright.
6. Install battery.
7. Attach cables to battery terminals, beginning with the positive
cable, using washers and nuts.
8. Apply spray lubricant to terminal to prevent corrosion.
MP47322,00F4671-19-15MAR13
Using Booster Battery
CAUTION: Avoid injury! The battery produces a ammable
and explosive gas.
To prevent the battery from exploding:
● Do not smoke or have open ame near battery.
● Wear eye protection and gloves.
● Do not jump-start or charge a frozen battery. Warm
battery to specication.
Specication
Battery—Temperature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16°C (60°F)
● Do not connect the negative (-) booster cable to the
negative (-) terminal of the discharged battery. Connect at
a good ground location away from the discharged
battery.
MXAL42872—UN—09APR13
A—Booster Battery
B—Disabled Vehicle Battery
C—Positive (+) Post
D—Positive (+) Post
E—Negative (-) Post
F—Negative (-) Booster Cable End
1. Connect positive (+) booster cable to booster battery (A) positive
(+) post (C).
2. Connect the other end of positive (+) booster cable to the disabled
vehicle battery (B) positive (+) post (D).
3. Connect negative (–) booster cable to booster battery negative (–)
post (E).
Service Electrical
41