Use and Care Manual

Operating - 20
OPERATING
Using Park Brake
Setting Park Brake
1. Raise park brake lever to lock park brake.
Releasing Park Brake
1. Lower park brake lever to unlock park brake.
Using Key Switch
MX31338
A - STOP (off) position - With key in the STOP position, all switched power
is off, and engine should not run.
B - Run (on) position - Turn key from STOP to this position, and all
switched power circuits will be on.
C - Start position - Turn key to start position to crank the engine. Release
key after engine has started and it will automatically return to the on
position. The engine will continue to run.
Using Mower Engagement Switch
• To Engage Mower - Pull mower engagement knob up.
• To Disengage Mower - Push mower engagement knob down.
Using the Hourmeter
• The hour meter shows the number of hours the engine has run. The hour
meter does not accumulate hours with the engine off when the key is in
the run position. Use the hour meter to determine when your machine has
reached the recommended service intervals.
• Turn the key to STOP position when not using the machine.
• Hour meter cannot be reset.
Using the Motion Control Levers
Before using the machine, become familiar with the motion control levers
and how they respond. It is essential to know how the machine
accelerates, steers and stops.
The functions of the motion control levers are:
• Dual function neutral position.
• Steering.
• Acceleration.
• Braking.
Start/shutdown Position
MX51451
• Motion control levers must be in the start/shutdown position (A) and the
park brake (B) locked to start the engine.
• Forward and reverse movement of the motion control levers is prevented
when levers are moved to the start/shutdown position.
• Operator can exit mower with the engine running when the mower
engagement switch is disengaged, the motion control levers are in the
start/shutdown position and the park brake is locked.
• Motion control levers must be in the start/shutdown position to safely
enter and exit the operator seat.
c CAUTION: Avoid injury! Children or bystanders may
attempt to move or operate an unattended machine.
Always lock the park brake and remove the key before leaving the
machine unattended.
C
A
B
c CAUTION: Avoid injury! Learn use of the motion control
levers and practice at half throttle until becoming proficient and
comfortable with the operation of the machine.
Do not move motion control levers from forward to reverse or
reverse to forward position rapidly. Sudden direction changes
could cause loss of control or damage the machine.
A
B