Use and Care Manual

MXT005379—UN—31JUL13

4. Remove three rivets (B) by prying them up using a screwdriver

under the head until it pops up.

5. Remove the rotating screen guard (C).

IMPORTANT: Be careful to maintain position of fuel pump

assembly (D), clips for fuel line, and any other attached

components when removing parts from side of engine.

6. Remove two screws holding fuel pump (D) to side of engine.

7. Remove bolts, the rotating screen, (F) and engine shroud (E).

MXT005356—UN—31JUL13

8. Clean debris from:

• Fan areas (G)

• Cylinder head cooling ns (H)

• Area between engine and frame

IMPORTANT: Engine shroud must be assembled so that the slots

in the shroud align with ridge in air intake and mating

surfaces along sides of engine. Failure to assemble

correctly will prevent the air lter from sealing and may

cause engine damage.

9. Install shroud, fuel pump, rotating screen and any other

components removed earlier.

10. Install rotating screen guard with three rivets. Rivets can be

reinstalled by pushing them into the fastened position.

11. Install air lter and air cleaner cover.

Checking and Cleaning Air Cleaner Element

Models Z525E, Z535M, Z535R, Z540M and Z540R

1. Park machine safely. (See Parking Safely in the SAFETY section.)

2. Let engine cool.

GXT002412—UN—15JUL15

Model Z525E

GXT002426—UN—15JUL15

Models Z535M and Z535R

Service Engine