Use and Care Manual

LP66653 (06/06/2022)
3 EZTRAK Z200 / ZTR AK Z300 Boarding Step
Installing
A
B
Parking Safely
1. Stop machine on a level surface
2. Disengage mower blades
3. Move motion control levers out to
the Start/Shutdown position
4. Lock the park brake
5. Stop the engine
6. Remove the key
7. Wait for engine and all moving parts to stop before
you leave the operator’s seat
8. Disconnect the negative battery cable or remove
the spark plug wire (for gasoline engines) before
servicing the machine
Installing
1. Use 3/8” x 2 ½” ange bolts and 3/8” ange nuts to
attach platform (A) and clamp plate (B) to left side
frame rail underneath foot rest. Hand-tighten bolts.
2. Conrm Boarding Step is level front to back and
clears frame, deck, and front wheel assembly
components.
3. Use wrench to hold ange nuts on the inside of the
mower while tightening ange bolts on the outside.
Operation
Board the vehicle as listed in the vehicle owner’s manual
or from the left side by utilizing the boarding step.