Instructions / Assembly

Assembly - 7

Assembly

Assemble Hopper to Frame

1. Remove hopper assembly, support frame, and inner carton from box.

2. Remove protective foam from bottom of hopper.

NOTE: Hardware for the next step is found on the Hardware Skin

Pack (Z-1912).

MX40299

3. Install six 1/4 x 1-3/4 in. hex bolts (A), and 1/4 in. flat nylon washer (B)

through top of hopper (C) and through support frame (D), as shown.

Secure bottom of bolt with 1/4 in. nylon locknut (E). To avoid damage to

plastic, do not overtighten hardware.

6 Nylon Locknut, 1/4 in. (P)

6 Nylon Washer, Flat, 1/4 in. (Q)

6 Bolt, Hex, 1/4 x 1-3/4 in. (R)

7 Nylon Locknut, 5/16 in. (S)

2 Bolt, Hex, 5/16 x 2-1/4 in. (T)

2 Carriage Bolt, 5/16 x 2 in. (U)

1 O-Ring, 3/8 in. (V)

3 Bolt, Hex, 5/16 x 2-3/4 in. (W)

1 Washer, Curved Spring (X)

1 Carriage Bolt, 5/16 x 3/4 in. (Y)

1 Hitch Pin, 1/2 x 2-1/2 in. (Z)

1 Fan Driver (aa)

1 Spacer, Latch (bb)

4 Bushing, Pivot Plate (cc)

1 Spring, Latch (dd)

1 Cotter Pin, 1/8 x 1 in. (ee)

1 Agitator Spring (ff)

1 Spring Locking Pin, Open-Style (gg)

1 Spring Locking Pin, Large Closed-Style (hh)

1 Spring Locking Pin, Small Closed-Style (ii)

1Grip, Flat (jj)

1 Knob, 4-Prong (kk)

2 Bearing, Axle (ll)

2 Snap Ring, E-Type (mm)

8 Washer, Flat, 5/16 in. (nn)

2 Washer, Special (oo)

2 Nut, Hex, 5/16 in. (pp)

Qty. Description