Instructions / Assembly

Storage - 19
STORAGE
Storage
Storing the Attachment
1. Park tractor safely. (See Parking Safely in the SAFETY
section.)
2. Remove all weight and material from attachment.
3. Remove attachment from tractor.
4. Wash attachment thoroughly. Allow to dry completely.
5. Replace all worn, damaged, or missing parts.
6. Sand any rusted areas lightly and paint with enamel.
7. Lubricate moving parts.
8. Apply a light coverage of oil to all tines and plugging
spoons to prevent rust.
9. Reduce air pressure in tires.
10.Store attachment in a dry area with tines against wall or
floor to avoid accidental contact.
11.Block up attachment off the ground to prevent contact
with moisture and take weight of the tires.
12.Place a waterproof cover over the attachment if it must
be stored outside.
Removing the Attachment from Storage
1. Wash the attachment if necessary. Allow to dry
completely.
2. Inspect tires for deterioration.
3. Inflate tires to proper pressure.
4. Make sure all parts are in place and hardware is secure.
c
CAUTION: Avoid injury! Plugging spoons and
tines are sharp. Wear gloves and handle with
care. Store attachments so sharp parts are
shielded from contact.
c
CAUTION: Avoid injury! Plugging spoons and
tines are sharp. Wear gloves and handle with
care. Store attachments so sharp parts are
shielded from contact.